Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Adjustable 2" receiver hitch is designed to be used on travel trailers and fifth wheels to provide a way to carry bike racks, cargo carriers, or other hitch-mounted accessories. Bolt-on or weld-on installation requires no drilling.
Features:
Specs:
Notes:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello, neighbors. I'm Steven here at etrailer.com. Today we're looking at this Stomberg Carlson Adjustable Accessory Hitch Receiver. Now folks, this is a universal hitch. It's designed to work and use on travel trailers and fifth wheels. It can be either bolted or welded on by a professional onto your trailer.
You can possibly weld it on yourself. Just note that it is only rated at a class two of 350 pounds if it is welded and installed by a professional welder only. Otherwise, it's only rated at a class one 200 pounds. Now the receiver opening is a standard two inch by two inch tube here. You get your safety chain attachments, all the hardware here needed and bracketry if you need 'em to mount to your specific needs.
Everything's a heavy duty steel that's been black powder coated. It's gonna resist rust, corrosion, and it's got a nice kind of reflective, glossy finish to it, which is pretty nice. It does install on various trailer frames. It'll work on either C channel or an I-beam frame. So if you're using C channel, it's gonna work on the horizontal wall.
Now, as I mentioned, you got from 49 1/2 inches all the way out to 76 1/2. So these side pieces here can extend out (metal grinds) all the way if you need 'em. And they got bolt holes here to mount it to your frame. You can either use it like this or if you need to invert it, you can invert it like that. So keep in mind, you got a lot of versatility with this hitch.
(metal clanks) And on the front you can kind of see over here you got a hole, and right here. What you'll do is once you get this set to the length that you need it, mark it, either do a center punch or a paint mark or something and then pull these back out, drill a hole through that, and on the backside of this guy, there's a welded nut and then you can put a bolt all the way through there for extra, you know, hold it from sliding and whatnot. Folks, this is not, I repeat, not designed to be used for towing. So please do not try to tow anything with this. This is just to add a connection point, if you will, to carry like a bike carrier to carry some bikes, maybe a cargo carrier, something like that. Again, the weight rating is a class one, 200 pounds or a class 2, 350 pounds only if it's been installed and welded on by a professional. Now I want to kind of show you some dimensions here real quick. This image will also be available on the product page. You can scroll down and find that in the ask the expert section of the page and you could also pause the video if you need to and write down any kind of dimensions you need. Keep in mind it is adjustable, so you got lots of variations that you could use if need be. Well folks, that's gonna wrap it up for our look at this Stromberg Carlson Adjustable Accessory Hitch. Again, 49 1/2 to 76 1/2 inch frames. I'm Steven. Thanks so much for watching. I hope this information's been helpful. Stay safe out there and have fun on your travels.
Average Customer Rating: 4.7 out of 5 stars (40 Customer Reviews)
Adjustable 2" receiver hitch is designed to be used on travel trailers and fifth wheels to provide a way to carry bike racks, cargo carriers, or other hitch-mounted accessories. Bolt-on or weld-on installation requires no drilling.I have reviewed some really great products from etrailer but this is not one of those. This will carry my bicycle but the quality of this hitch made in china is poor. The welds have little penetration and are porous. I will grind and re weld but would not buy this product again. This is the first time I have gotten a product from etrailer that is poor quality.
Although I am satisfied with the end result, installation was a bit involved. I elected to mount this hitch on the rear of our camper trailer in order to support a bike rack. The 17mm holes that were needed in both the frame and hitch were challenging to drill. I strongly recommended using titanium bits. Start small and work your way up. Most of my time was spent adjusting and measuring to ensure a proper fit. Once completed, the hitch is a solid base. No worries with reliability.
Easy bolt on to 5th wheel. Did have it welded because it is now the low point and when my rear drags it takes the pressure off my trailer. It has been a great asset to put our bike rack on
I had it welded to the frame and it works great. I use it to carry my generator while traveling in my RV.
I really in joy my receiver hitch it can do so much more than what it is rated for I have pushed mine to it limits by towing ( at my on risk of course) but it is rugged and extremely well-built I’m well pleased with my purchase
Worked great for adding a hitch to our travel trailer. Always need to haul more junk when on vacation.
I have a Newmar Cypress 2006 and it has the connections for a hitch, but of course they no longer make it. I had to have someone make an adapter plate for my hitch to line up the holes and it worked perfectly. THANK YOU so much for sending this unit quickly. Although the packages was damaged all the parts where there and it has fit my needs. Please to try out with bicycle rack next month on a long trip.
Bought this particular one for my rv because I didn't have any room to mount anything other brand due to power stabilizing jacks and the way they mounted the rear bumper. It works as intended
Seems like a really great trailer hitch. Excellent welds all the way around. Only complaint is that it wasbt clear from the product description that it is only rated as a class 1 hitch (200 lbs) when used in a bolt-on configuration. You only get the full 350 lb tongue weight rating when used in a welded config.
Easy to install! We'll built and shipping was super fast!
Dennis S.
8/18/2024
Still working strong. Was so easy to install and adjust to fit.
Added to my Airstream, worked great. Response time and shipping from etrailer was awesome. One of the few adjustable receiver hitches available.
Every one was great I received my order in a short time Brandon did a super job
Thanks to everyone
Quality well manufactured hitch receive r.
From order to delivery was timely but the package was ripped and then tapped. Due to the shipping a part was missing. Contacted Strom this morning with the information.
Bought to install on fifth wheel RV. It is installed and seems to be very sturdy for supporting a bike rack with two e-bikes that weigh appropriately 60 lbs a piece. Seems to be made very well. Bought because of the adjustability of the hitch. Would recommend this product.
Made better than I thought. Had everything I needed to install on our fifth wheel.
Heavy duty, quality was great.
looks like a good hitch, seems to be well built easy to install
Worked very well installed on my travel trailer for use as a bike rack for two eBikes. Total weight with carrier is 175lb. Therefore I’ll add a few beads of weld to enhance the strength where bolted to frame. Hardware and hitch assembly were heavy duty. Took nearly four hours since it’s heavy (65lb) and bulky to handle. Would recommend.
The product is very well made and heavy duty. I gave three stars because after ordering this I discovered that the same item is offered by others like [online] for a LOT less than etrailer.
Quick delivery. Good price.
Arrived on time... Quailty built and looks good too!
It was what I expected and fit fine.
The product is very heavy and well made.
Delivery was lightning fast. Great details and pictures before order as well.
Do you have a question about this RV and Camper Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Brooke M.
2/10/2024
We had our stock checked and none of what we have has welds like in your picture. So its not a wide spread issue with this hitch. I already sent your info and the picture to our customer service team and asked them to reach out to you about this. I dont think you should have to re weld a brand new hitch! It should have arrived ready to go.