Could Lippert Tire Winch Mount Fit 2020 Coachmen 240 FS

Published 10/26/2022

Question:

I have a 2020 Coachmen 240 FS which is built on a 2019 E450, with a V10 engine. There is a place for a spare tire hoist which has pre-installed bolts coming down from the frame. It looks like it’s all set up to accept a winch already. Will the Lippert Spare Tire Winch with Offset Cable Item # LC159056 bolt right onto the frame? What else would I need to make this work besides a mounted spare. As you can see from a photo, I have the uncounted spare strapped up into the area created for a spare. One note on the photos…the angle iron with installed bolts frame piece shown runs parallel to the road. Thanks for your help,

asked by: Greg B

Expert Reply:

It's possible the Lippert Spare Tire Winch with Offset Cable # LC159056 could attach to the studs you have under your RV frame but the studs would need to be 5-1/4 inch apart on center as this has mounting holes that are 5-1/4 inches apart. The width of the mounting bracket is 1-3/4 inches so the channel this would fit into would need to be at least that big.

expert reply by: Jameson C