Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Hello Ray, thanks for reaching out. The #GS-2250DL are for grease only, and they are not intended to be used in an oil bath system. A better option for that is the Timken Grease Seal part #TMK98ZR. This is identical in size to the #GS-2250DL seal,…
view full answer...For a jack that is similar and has a bolt-on installation I recommend the Trailer Valet JXS Trailer Jack w/ Footplate #TV64FR. This is a sidewind swivel jack with a 5,000 lb support capacity that fits a frame up to 4-3/4" tall x 3-3/4"…
view full answer...Hi John, No, the Square A-Frame Jack #TJDA-5000S cannot be side mounted but we do have a similar option, with a sidewind handle and footplate, that can be, the Trailer Valet Trailer Jack #TV64FR.
view full answer...The distance between the mounting holes of the etrailer Bolt-On Swivel Mounting Plate #e52JR that you referenced is 3-1/2 inches.
view full answer...The Timbren Suspension Enhancement item #T28MR and the RoadActive Suspension item #RAS54FR can both be used in tandem on your 2021 Silverado 1500 but I wouldn't recommend it. The Timbrens are great to reduce sag but they only engage when your…
view full answer...The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…
view full answer...First you will need to remove the old hydraulic equipment. Remove the surge coupler or actuator, remove all the lines, and finally remove the brake assemblies. If you have 10 inch diameter hub and drums, you may need to replace those as well. If you…
view full answer...You can convert surge brakes to an electric over hydraulic braking system. To do this, you will need an electric over hydraulic actuator and a brake controller. For an electric over hydraulic actuator, I recommend looking at the Carlisle HydraStar…
view full answer...Yes, we have just what is needed for your 2022 Jeep Gladiator. I recommend the Tekonsha Prodigy P3 Trailer Brake Controller, #90195 and use the Tekonsha Custom Wiring Adapter for Trailer Brake Controllers - Jeep, #3073-P. This adapter plugs into the…
view full answer...For a tire to replace the 145/R12 size tires currently on your trailer, I recommend the Kenda Karrier S-Trail Radial Trailer Tire #AM10130. This is a great radial trailer tire that has a 1,220 pound maximum load at 65 psi. Note that this is a Load…
view full answer...The BTR and BT8 denotations refer to the spindle, not the trailer hub. The difference between a BTR and BT8 spindle is that the BTR spindle uses a 1.063" diameter L44649 bearing and the BT8 spindle uses a 0.99" diameter L44643 bearing. In…
view full answer...I took a look at the Demco Kar Kaddy SS Tow Dolly with Disc Brakes #DM9713045 that you mentioned, and compared the maximum weight capacity of this dolly to the GVWR of your 2019 Ford Transit Connect, and it appears that your vehicle is too heavy.…
view full answer...Related Searches
Filter Your Search
Contact and Help