Replacement Brackets for Tekonsha P3 Brake Controller

Question

Question:

where can I find the extra brackets fo r the tekonsha p3? We have 3 vehicles to move the controller between. I saw them for the Prodigy, but not the P3.

asked by: Eric B

0

Expert Reply:

I have 2 part numbers for you to replace the cradle for your Tekonsha Prodigy P3. Part # TK5901 is the cradle, # TK5904 is the bracket that screws into the dash.

You would have to assemble these to parts to have a complete mounting bracket.

expert reply by: Patrick B

0

Answer 1

The wire bundle to install a brake controller on a 2008 Chevy Suburban is tucked up under the dash but may be more to the left of the steering column than on GM trucks. It is most likely tucked up above other components or wiring. There should be a…

view full answer...

Answer 2

That's understandable; the Tekonsha P3 #90195 is one of our most popular and well reviewed brake controllers for a good reason. You can use the replacement bracket #TK5906 to mount the P3 in your new 2019 Toyota Tacoma. You can use this, with the…

view full answer...

Answer 3

Hey Matthew, thanks for reaching out! We do actually carry a plug-in adapter for installing the Tekonsha Prodigy P3 #90195 on your 2020 Silverado 1500. What you're looking for is the Wiring Adapter #3064-P. Is the Prodigy P3 brand new, or are you…

view full answer...

Answer 4

The Plug-In Wiring Harness #3064-P that you referenced is the correct brake controller harness for your 2019 Chevy Silverado 1500 and it is actually a brand new product for this generation of GM trucks (it currently only fits the 2019 model Silverado…

view full answer...

Answer 5

You can absolutely use the same harness from your Tekonsha P2 #90885 to plug in to your Tekonsha P3 #90195 since the hardwire harness #7894 that the P2 uses has the same connector as the hardwire harness #20127 that is used for the P3. The only…

view full answer...

Answer 6

I have 2 part numbers for you to replace the cradle for your Tekonsha Prodigy P3 #90195. Part #TK5901 is the cradle, #TK5904 is the bracket that screws into the dash. I am not sure which one you are using now but hopefully the alternative to what you…

view full answer...

Answer 7

Hi there Ron; the correct Tekonsha brake controller wiring harness for your 2024 Chevy Silverado 1500 is the following: - Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers #3064-P

view full answer...

Answer 8

We do have the replacement P3 mounting bracket part #TK5901 you are looking for.

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Replacement Brackets for Tekonsha P3 Brake Controller

Continue Researching