Result: hitch scale

Hi Bob; the BTBRV Tongue Weight Scale #BTBRV44FR comes with a limited lifetime warranty.

Hi James; the BTBRV Tongue Weight Scale #BTBRV44FR uses a 323 gauge so the margin of error is 3%. The gauge on the scale displays weight in 50-lb increments up to 2,000 lbs.

Hey Roy, great to hear from you again! Yes, we have the Inno Locker #INXA445 as well as the LockRack Series-X #LR88FR which both install into the top channels of crossbars and give you a way to secure a canoe. The Locker comes with a strap while the…

Hey Roy, thanks for reaching out! Sounds like you have the TS Rails for TruXedo Elevate Rack System #TH75FR on your 2023 Ford F-150 short bed. There aren't any bike racks that fit directly to the rails, but if you install the Telescoping Rack…

Hey Thien, thanks for the picture of the Command light you have on your Jayco. Yes the part #328-003-6019R that you referenced would work great in place of it.

This is a really good question that I would be happy to help clear up for you. So the additional weight behind the rear axle from cargo gets counted as tongue weight when picking out a weight distribution system, but it does not also need to be…

If you check out the diagram I attached of the side of the Lippert Components Spare Tire Winch #LC159056 that mounts you can see that the distance between the mounting hole locations is 5-1/4" on center. I reached out to my contact at Lippert…

Looking at the BAL Retract-A-Spare it has a much different design than the Lippert Spare Tire Winch #LC159056 you found. You may be able to mount the new winch so it will still work on your trailer but as we do not have both the products here with…

Most of the 2-5/16 inch hitch balls will use either a 1-inch diameter shank or 1-1/4 inch diameter shank. The nut size on a hitch ball with a 1-1/4 inch shank, like the Tow Ready 2-5/16 Inch Hitch Ball, part #19286, will use a 1-7/8 inch socket. A…

Based on the weight range of Casita travel trailers the best weight distribution and sway control we have would be the Reese Strait Line part #RP66082 which has a tongue weight range of 200-600 lbs and features the best sway control at fighting sway…

The Redarc instructions for the Plug-and-Play Wiring Harness #RED39FR you purchased only lists through 2019 because they haven't updated the instructions as of yet, but the adapter will fit your 2023 Nissan Frontier and allow you to install the…

Hubs will heat up when driving, but if it feels like they are getting too hot, then you will want to look at a few things on your hub. My guess is that the spindle nut is too tight and the added stress on the bearings is overheating the bearings and…