Result: trailer hitch lock

Yes, it will David so long as you're using a 2-1/2" hitch to 2" hitch adapter like item #e53YR. The Blue Ox Hitch Receiver Immobilizer III item #BX88312 is only designed to be used with a 2-1/2" hitch and shank of 2" hitch…

Hey Barb, one solution is to go with a 1-1/4 inch to 2 inch hitch adapter like the #HTAD but the downside is that these adapters cut the hitch capacity by 50 percent and they do add movement and length to the setup. This is most ideal if the rack…

Hello Fillip, Good afternoon to you as well. I was able to get out to the warehouse to get that measurement. On the Benton LittleShift Bike Rack for 1 Bike #B54VR from the hitch pin to the furthest part of the rack is 22". You can compare this…

Hey Bruce, I have not personally heard of that but I did go ahead and check out the instructions to see if anything like that was mentioned. What I think is happening is you have your chains adjusted up too high. Curt specifies that the Curt Round…

Good afternoon Nathan, that's a great question! You can use the etrailer Anti-Rattle Hitch Collar for 2" Hitch Receivers #e38FV with a 3" to 2" reducer adapter like Buyers Products 3" to 2" Receiver Tube Adapter…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Hey Bob, the hitch part #DT48GR is a fit for your 2025 Hyundai Santa Cruz but the trailer wiring you mentioned is not carried over as a fit yet so I can't state for sure if it will fit the 25 model. Right now the trailer option we have is the…

Hey Doug, That's a good question because fit is really important so the cover stays snug on your trailer, and there is a specific way to measure for the etrailer covers. It's pretty simple, and what you want to do is measure the body of the…

Henry, when it's put that way, it does sound like it could be more problematic but the Curt 4-Way Flat Magnetic Connector Adapter #C34RJ does have flat connection surfaces which are easy to keep clean - so should dirt and whatnot build up, it…

Hey Al, for a flexible brake line that could attach to the back of the master cylinder of the Demco Actuator part #DM8609101 that you ordered you'd want the part #DM05982 which is 19 inches long. I'll put a note in your order notes that you…

Hi Harry; you can actually add sensors to the TireMinder i10 #TM98FR since it supports up to 20. All you need to do is order additional sensors using #TM66FR to cover your Ford Maverick. This will keep everything together on a single monitor.

Hi Bernadette, You would want to plug your 50 amp to 30 amp adapter in to the power pedestal and then connect your Portable Power Watchdog Surge Protector #HU42VR to the adapter. Once the Watchdog lights show that the connection is good you can…