Replacement Axle, Hubs, and Brakes for 2017 Jayco Jay Flight With Lippert Axle
Updated 09/16/2026 | Published 09/12/2026 >
Products Featured in This Question
Question:
Need to replace a Axil, and hubs and electric break assemblies on a 2017 Jayco J Flight. I have the Lippert number for the assembly, V000179566 Any help you might be able to give me on figuring out what the replacement is, or how to navigate would be great. Even if its Hubs and Break units would help. Thank you.
asked by: Dan B
Expert Reply:
Hey Dan! What you have there is a 3,500 lb Lippert axle that is 86" long. If your leaf spring run under the axle you need # LC73PK and if they sit on top of the axle (overslung) # LC33PK. This matches the capacity, length, and spring center measurement of your existing axle for a direct replacement.
Then for hubs, I recommend the Easy Grease Trailer Hub and Drum Assembly # AKHD-545-35-EZ-K. You can pair these with the etrailer Electric Trailer Brakes - Self-Adjusting # AKEBRK-35-SA. If you need new brake mounting hardware you will also want to grab the # BRKH10B.
What happened to the axle on your Jayco?
Product Page this Question was Asked From
Lippert Trailer Axle Beam with Super Lube Spindles - 86" Long - 2,500 lbs to 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- No Hubs
- 3500 lbs
- Spindles Only
- 68-1/2 Inch Spring Center
- 86 Inch Hub Face
- No Drop or Lift
- Lippert
more information >
Continue Researching
- Search Results: trailer axles
- Search Results: tekonsha prodigy
- Search Results: prodigy p3
- Search Results: 86 inch hub face trailer axles
- Shop: Lippert Trailer Axle Beam with Super Lube Spindles - 85" Long - 2,500 lbs to 3,500 lbs
- Video: Review of Lippert Trailer Axles - Trailer Axle Beam With Super Lube Spindle - LC73PK
- Video: Review of Lippert Trailer Axles - Trailer Axle Beam - LC63PK
- Search Results: trailer leaf springs
- Shop: Lippert Trailer Axle Beam with Super Lube Spindles - 93" Long - 2,500 lbs to 3,500 lbs
- Video: Review of etrailer Trailer Hubs and Drums - Hub with Drum - AKHD-545-35-EZ-K
- Shop: Dexter Trailer Axle Beam with EZ-Lube Spindles - 89" Long - 3,500 lbs
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: etrailer Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3,500 lbs
- Shop: Lippert Trailer Axle Beam with Super Lube Spindles - 86" Long - 2,500 lbs to 3,500 lbs
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Video: Dexter Nev-R-Adjust Electric Trailer Brakes Review
- Video: etrailer Easy Grease Trailer Hub and Drums Installation - 2020 K-Z Sportsmen Classic Travel Trailer
- Q&A: How Thick Are Electric Brake Shoe Pads and When Should They be Replaced
- Shop: Brake Controller
- Q&A: Do You Have a 3,500 lbs Overslung Axle w/ a 86" Hub Face and a 68-1/2" Spring Seat?
- Q&A: Recommended Brake Controller for 2017 Chevy Silverado
- Q&A: Replacing/Upgrading Axles On A 2017 Jayco Whitehawk 27DSRL
- Video: A Closer Look at the Timken Bearing Kit for Lippert, Dexter, and AL-KO Axles
- Q&A: Do Trailer Drums have to be Turned when Replacing Electric Trailer Brake Assemblies
- Video: Review of EMCO Trailer Leaf Springs - 3 Leaf Double Eye Spring 4000 lbs Trailer Axle - EM66AJ
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Search Results: trailer hitch
- Q&A: What is the Difference Between a Class II and a Class III Hitch?



