Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Yes that's correct. The Removable Wheel for Trailer Valet JXS Trailer Jacks #TV89FR has a 2" diameter which will fit in a 2" diameter tube like the Trailer Valet JXS Trailer Jack w/ Footplate and Drill Powered Option…
view full answer...The Extreme Off-Road Swing-Up Trailer Jack w/ Dual Wheels, #ORJW350D has an overall length of 18".
view full answer...Yes, the Extreme Off-Road Swing-Up Jack w/ Dual Wheels iItem #ORJW500D will work for your T@B 400 Tear Drop Trailer. It looks like your trailer comes with an a-frame jack. You would need to ensure you have enough space on your tongue to accommodate…
view full answer...?The distance from the mounting plate to the foot on the Trailer Valet JX-2K #TV54FR is 13" when fully retracted. The distance from the mounting plate to the top of the jack is 23". This jack can provide you with up to 14"…
view full answer...The Trailer Valet JXC Trailer Jack w/ Footplate and Drill Powered Option #TV54FR had just switched to using the round mounting plate over the triangular mounting plate. We have updated our pictures to match the new product but there are a couple…
view full answer...The 3-bolt mounting flange on the Lippert Electric A-Frame Trailer Jack #LC285318 has a standardized hole pattern. This jack is intended to mount so that the included LED light faces forward toward the tow vehicle to illuminate the coupler and…
view full answer...The trailer hitch options for a 2022 Hyundai Tucson are both concealed meaning the crosstube is hidden. They also both install in the same way as well with no cutting or drilling required. In regards to the Curt Trailer Hitch Receiver part #C94WR and…
view full answer...The bolt hole dimensions on the bottom of the Jif Marine Single-Speed Boat Trailer Winch with 20' Strap and Brake item #315-W2000D are 2.5 inches apart center to center. The attachment point to the center bolt is a slot that is 3.5 inches - 5…
view full answer...I went out to our warehouse and measured the Single-Speed Boat Trailer Winch part #315-W1800D for you. The dimensions of the base are as follows; 6-1/4" long x 3-3/4" wide. I have attached a photo of these measurements for you as well. If…
view full answer...Per the specs of the Shurflo 4008-101-A65 it looks like we have two very good options in the HydroMax RV Fresh Water Pump, #P25201 and the Seaflo Diaphragm Pump for Boats and RVs, #SE58FR. Each are 12VDC pumps and rated at 3 gallons per minute and…
view full answer...It sounds like the Removable Steel Foot with Pin for DL22530 A-Frame Trailer Jack by Dutton-Lainson, item #DL22541, will be the closest fit we have for your trailer jack. This foot plate has an inner diameter of 1-3/4 inches which is slightly larger…
view full answer...The smallest diameter jack we have with a footplate or wheel is the A-Frame Trailer Jack - Sidewind - 1,000 lbs. by Dutton-Lainson #DL22530. This is 2 inches in diameter at the top and 1-3/4 inches at the bottom, so you will need to enlarger the jack…
view full answer...Filter Your Search
Contact and Help