Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Hey, Allen! All depends on what you're towing. Would you be able to give me some information such as what kind of trailer(s) your towing, is there going to be any sort of gear or equipment in the truck bed, and lastly does your truck have any…
view full answer...Hello Mark, Great question, happy to help you make a decision between the Torklift and the RAS. For your 2024 Nissan Titan XD Pro-4X with a slide-in camper and running right up at your payload limit, I would recommend the TorkLift StableLoad…
view full answer...For your 2018 Toyota Tundra, I recommend the SumoSprings Solo Custom Helper Springs item #SSR-610-47. These are the black 1,500 lbs capacity ones. They will keep your Tundra level when you're towing or hauling a heavy load. You will not be able…
view full answer...I would recommend the Air Lift LoadLifter 5000 Ultimate Air Helper Springs #AL88299 over the SumoSprings #SSR-610-47 for your 2016 Toyota Tundra carrying a slide in camper. The Air springs allow you to adjust the air pressure in the springs to dial…
view full answer...Sumo Springs should do a great job at helping to control the movement of your 2018 Toyota Tundra but if your suspension is worn out then newer leaf springs would help, but if you have the 1,000 lb SumoSprings #SSR-610-40 you can upgrade to a stronger…
view full answer...Hey Brandon. The longest hitch extender we have is the 14" long Gen-Y Hitch item #GY89SR. This fits a 2" receiver and has a 10,000 lbs capacity but it will reduce your hitches capacity by 50% like all hitch extenders do. The 15-3/4"…
view full answer...Like most other brake controllers do, the Draw-Tite Activator IV, part #5504 sends a small test pulse of voltage through the brake output circuit to confirm that the trailer is plugged in and that the brake magnets are receiving the signal. This…
view full answer...The only other extension option we carry besides the Torklift SuperTruss extender that does not cut your tongue weight in half is an extra long ball mount. Traditional extensions such as part #C45796 cut the tongue weight capacity of the hitch on the…
view full answer...We do offer hitch extenders/adapters that will fit into a 2-1/2-inch hitch and reduce the receiver opening size down to a 2-inch size but none of these is 18-inches long. There is another way to go that might work for your application. You could use…
view full answer...A hitch extension does cut your trailer hitch capacity by 50 percent, but for as light of a trailer as you have and how heavy duty your tow vehicle is that wouldn't be an issue. So yes, a 14 inch hitch extension like the #C45795 would be a solid…
view full answer...One of the differences between Draw Tite adapter #HE18 and the Curt model #C45796 is the length. They both have 18" between hitch pin hole and the ball hole, the Curt is overall a bit longer. The Curt has an overall length 23-1/4" and the…
view full answer...The #D30 you referenced is for hitch fabrication and it sounds like you simply need a hitch extender. There is an 18 inch extension, the Curt Extender for 2" Receivers -18" Long #C45796 which you can use with a bike rack. The only thing to…
view full answer...