Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Hey Dan, yes the sensors of the TireMinder i10 TPMS for RVs and Trailers w/ Signal Booster #TM89FR that you referenced will work with the longer valve stems you have on your 2017 Jayco Greyhawk 29ME. The sensors do not have a valve stem length…
view full answer...Yes, Jerry, the blue Safe-T-Plus #ST95MR is made exactly for that chassis. Your Freightliner XCM falls right in its GVWR range, and the included hardware kit bolts directly to the drag link bracket. Once centered, you’ll notice the wheel stays put…
view full answer...Hi David! The Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to 26-3/4" Lift - 2 Tons #PM44FR weighs just over 15 pounds (15.09 to be exact). In case you were curious about the weight of the other two Tallboy bottle jacks we carry,…
view full answer...Hey April. You can definitely use a lighter or a match to light the GE Profile Propane RV Range - Drop In item #GE57VR if you do not have 12v power. This process is not only covered in the installation instructions that I have linked below but…
view full answer...Welcome back Dan! The Trimax Universal Anti-Rattle Clamp item #TMX66SR is extremely effective at adding stability when used with heavy setups. Since last years upgrade to wingnuts from standard nuts and the inclusion of lock washers we have not…
view full answer...Hey John, thanks for the pictures and the information. The Fogatti Quiet LP Gas RV Furnace item #FG65FR would be a good replacement for your 40k Suburban furnace. If you wanted to match your current one you can get item #FG45FR, which is an identical…
view full answer...Hey David, thanks for reaching out and providing all of the information! I took a look at all of the running boards that fit your 2018 Ram ProMaster 3500, and they all look to mount in the same locations as the Aries RidgeStep Running Boards w/…
view full answer...I would be more than happy to help you find replacement steps for the Scs/Frigette 733-0074 steps on your 2008 Monaco Dynasty Renaissance IV! We don't have any exact conversions but we do have replacement 2-step steps that you can potentially…
view full answer...If the screen door is not close to closing you need to trim the bottom of the screen door frame which I have also had to do. To do this, with the steps down, take tape and place a piece on each side, down on the threshold, at the edge of the step…
view full answer...Hello Jay, So, the good news is that yes, the CRE4000 #MR29DR can work with your 2023 Grand Design Imagine 2500RL. It’s built for tandem axle setups with axle ratings from 3,500 to 7,000 lbs, just like the CRE3000. As long as your axle spacing is the…
view full answer...I believe what you're looking for, for your MORryde Quick Connect RV Steps for 21-1/2" to 27-1/2" Entry Height #MR85HR is the: -Replacement Latching Mounting Bracket for MORryde Quick Connect Steps #MR32HR. If this is not what…
view full answer...Hey Tim, I checked out your Predator 5000 generator and it does use a quick connect propane connector like what the part #CAM57629 provides so yes this would work. How do you like the Predator generator?
view full answer...