Search: maxair fan   >  

Yes, you can. The MaxxAir UniMaxx Universal Replacement Lid for RV and Trailer Roof Vent, #MA00-335001 is a translucent white. This pre-assembled lid mounts onto frame of roof vent.

The big difference is the corners of the main panel of the #FV807357 are cut out with small section to allow access to mounting hardware and the #FV807359 instead does not have this area cut out. So you'd want to look at your vents to see if…

The Fan-Tastic Vent Roof Vent Assembly Upgrade Kit #FV807357 installs to the garnish that is already installed, which is what clamps to the roof opening inside the RV. You will need to remove the ceiling garnish first to be able to access the roof…

I contacted MORryde and this does happen from time to time as the weight of the trailer can spread out the axles due to downward pressure on the springs/suspension. Odds are the 35" wheel base #MR27ZR will be the correct one for you, but…

We can find you a new roof vent for your StarCraft Camper, though we do not have access to parts list for each year, make and model of trailer. Should you have the standard 14-1/4" x 14-1/4" roof vent opening I recommend taking a…

The recommended lug nut torque for your 7,000lb axle depends on a few factors like wheel size, stud size etc. Check out the attached photo which shows the torque specs for a variety of applications. I see you were looking at the Dexter Nev-R-Adjust…

The rain sensor itself on the MaxxFan Plus Roof Vent #MA00-04500K that you referenced is located at the far right corner away from the lid assembly on the fan. I have attached an image pointing out the sensor that you can check out as well. When…

Between the Shocker Hitch and Gen-Y Torsion ball mount, I recommend the Gen-Y. Its rubber torsion arms are going to absorb road shock naturally due to its design, while the Shocker Hitch requires constant maintenance that isn't needed with the…

We have seen people mount storage boxes on either side of the nose of a V-nose trailer like what you see in the picture I attached. The part #DZ91717P would work well if you have room for it like that. The dimensions of the box are 36" long…

Yes, the MaxxAir Deluxe Roof Vent #MA00-05100K that you referenced can be installed on a sloped roof (as long as it's still a straight incline/decline and not domed shape roof). This is really the case with any of the roof mounted vents we have…

Hey Jaime, yes you can replace your 25-1/4 inch 3,500 lb axle leaf springs with a 5k rated axle spring like the part #e44SR. This will increase the suspension's weight capacity and might make the ride quality a little rougher but it would fit and…

The Draw-Tite Class I Frame Trailer Hitch, item #24805, is bolted to the vehicle frame using existing holes. No drilling or welding is required. All installation hardware to connect the hitch to the vehicle is included. You will need to trim a small…