RV puck light recesses into the ceiling of your RV to provide you with a sleek, low profile look that other puck lights don't have. Warm white LEDs are more energy-efficient, last longer, and burn brighter than incandescents.
Features:
Specs:
Need extra light on your kitchen counter for when you need to prep meals for the family? Or perhaps you need a light in the hallway so you can see where you're going when walking to the bathroom in the middle of the night? This puck light has warm white LEDs that give you accented light underneath a kitchen cabinet, in a closet, over a reading nook or chair, or in a walkway inside your RV or camper.
LEDs are more energy efficient, last longer, and burn brighter than lights with incandescent bulbs. You won't have to worry about replacing bulbs that have brittle filaments. And because LEDs draw minimal power, the light won't drain your battery, overload your circuits, or produce too much heat.
Recessed, Spring-Mount Installation is Easy
This puck light is incredibly easy to install as an upgrade or a direct replacement of your existing light. Because it has a low-profile, recessed design, you will need to cut out a 5-1/4" diameter hole if you're not directly replacing a light. To install, use the built-in clips to gently insert the light into the ceiling, wall, or cabinet, and the clips will hold the light in place. The light connects to ground (white wire) and power (black wire) and wires to an interior light switch.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Jeff: Hello everybody, this is Jeff at etrailer.com. Today, we're going to take a look at this recessed mount, 3 1/4" round LED RV puck light with the frosted glass lens. Now, this is a nice low profile dome light that illuminates your RV's interior with a nice warm white light. The LEDs they use make great replacements for incandescent lights. They last about 50 times longer and they're more efficient because they'll provide brighter light with less power output, and of course no bulbs to replace, no brittle filaments to break. It does use a frosted glass lens with white LEDs.
Now at the end of this video, I am going to hook this up to some 12-volt power to show you how bright the light is. This is compatible with 12-volt DC systems. It is a two wire design. You can see it includes the lead wire for power and then the lead wire for ground. Does include this box here, which is an external voltage regulator.Now to install this light, it's a very simple installation, there's no hardware needed.
Basically, it just uses the spring loaded clips here. Basically, what you'll do is cut a 2 1/2" diameter hole, which is the diameter of the cutout you'll need, cut that where you need to install this, connect your two wires, put your box up on top there, and then basically push the spring clips all the way. They're spring loaded, so you push these spring clips all the way straight up and then push it into that hole that you cut and then once it gets all the way in there, the springs will clip back down and hold it to your ceiling. It's pretty simple installation, you don't have to do any drilling or use any hardware. Just push these spring clips up and let it hold it into place.A few specs on this, the CRI, which is the color rendering index is 90.
Now, light sources with a CRI of 85 to 90 are considered good at color rendering. Voltage on this is 12-volts. Wattage is five Watts. Total wire length on this about 15". Just to give you some overall dimensions.
Diameter on this slide, edge to edge is 3 1/4". The depth or thickness of it is about 1/2". What I'm going to do now is we're going to go ahead and hook this up to some power and we'll show you, your white wire would be your ground and your black wire would be your power. Once we got those set up, go ahead and put on our power and there you can see the light come on. I'll go ahead and turn off the overhead lights and you can see.Keep them from touching. You can see with that little light is giving off quite a bit of light. Once this is installed, you can see it'll give off nice white light. We'll go ahead and turn back on our overhead lights. Go ahead and turn off our power, disconnect everything. That should do it for the review on the recessed mount 3 1/4" round LED RV puck light with the frosted glass lens.
Same as OEM. Only difference is u included a trim ring that Forest River probably thru away instead of installing to cover up the screws.
Easy order fast shipping great customer service
Fast shipping and great price thanks
I have 12 of these 12v lights mounted in the headliner of my yacht. They are easy to mount and the tension springs are strong. We really love the light they put out!
Item is the perfect replacement and arrived on time no issues
The light was just as advertised, very happy with it.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.