How To Measure To Make Sure The MORryde CRE3000 Equalizers Will Fit Your Trailer
Published 10/27/2021 >
Question:
I have a 2021 Forest River SABRE Cobalt 32dpt that Im interested in installing the CRE 3000 suspension on. The measurement I took from wheel center to wheel center was 36. I noticed there wasnt an option available for a 36inch wheelbase. Am I taking the wrong measurement or doing something else wrong? Any help you can give me is greatly appreciated. Thank you
asked by: Douglas S
Expert Reply:
I contacted MORryde and this does happen from time to time as the weight of the trailer can spread out the axles due to downward pressure on the springs/suspension. Odds are the 35" wheel base # MR27ZR will be the correct one for you, but they did recommend measuring your frame hanger spread (FHS). This should be done from the center of the front hanger to the center of the rear hanger. I included an image of the measurement table as well, just in case you need it.
With that being said, if your measurements a vastly different from what is listed, let me know what you get and I can see if there is a kit that will work for you.
Product Page this Question was Asked From
MORryde Shock Absorbing Suspension Equalizers for Tandem Axle Trailers w/ 35" Wheelbase - 8K
- Trailer Suspension Parts
- Equalizer Upgrade Kit
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- 8 Inch Long
- Tandem Axle
- MORryde
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: MORryde Rubber Equalizers for Tandem Axle Trailers - 33" Wheelbase - 8K
- Shop: MORryde Shock Absorbing Suspension Equalizers for Tandem Axle Trailers w/ 35" Wheelbase - 8K
- Search Results: trailer suspension parts
- Shop: Lippert Road Armor Shock-Absorbing Equalizer Kit - Tandem Axle - 3,500-8,000 lbs
- Search Results: x~factor
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 3-1/8" Long Shackle Straps
- Search Results: demco 6271
- Search Results: curt 13615
- Search Results: curt 56434
- Search Results: cre3000
- Shop: MORryde X-Factor Crossmember for Standard Frame Hangers
- Search Results: companion fifth wheel hitch rvk3500
- Q&A: Which Leaf Spring Is The Best Replacement For A Bouncy 2019 Grand Design Momentum 351m 7K Axles?
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers w Correct Track - 2-1/4" Shackle Straps
- Shop: Gooseneck Hitch
- Shop: Onan Generator - QG 4000i DF Onboard RV Generator - 4,000 Watts - Gas or Propane
- Q&A: Lug Nuts For 2022 Grand Design Solitude
- Shop: Brake Controller
- Shop: Suspension Enhancement
- Shop: Trailer Wiring
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Video: Review of PowerMax RV Toilets - Standard Height White RV Toilet - PM62VR
- Video: Breaking Down the MORryde Suspension Upgrade Kit for Tandem Axle Trailers
- Video: Detailed Breakdown of the MORryde Rubber Equalizers for Tandem Axle Trailers
- Shop: Trailer Hitch
- Video: The Low-Down on the Dexter Shackle Bolt for Double Eye Springs
- Shop: Camper Tie-Downs
- Video: PowerMax RV Toilets and Fresh Water Pumps Manufacturer Spotlight
- Video: Hands-On with the Demco Autoslide 5th Wheel Trailer Hitch for Toyota Tundra
- Video: Feature Review E-Z Flex Equalizer for 1-3/4" Double Eye Springs



