Can Storage Boxes be Mounted on Front of V-Nose Trailer

Question

Question:

Please, Is there a tongue mounted tool box made that fits on the front of a cargo trailer with a pointed front wall? Thanks

asked by: Michael G

0

Expert Reply:

We have seen people mount storage boxes on either side of the nose of a V-nose trailer like what you see in the picture I attached.

The part # DZ91717P would work well if you have room for it like that. The dimensions of the box are 36" long (back) x 18" long (front) x 19-1/2" wide x 17-3/4" tall.

expert reply by: Jameson C

0

click to enlarge

Charles M.

2/11/2020

Where can I get the bracket that holds these boxes on the v nose trailer from?

Jacob H.

2/12/2020

The bracket in the picture is a custom made bracket that this customer made to hold his two tool boxes.

Jeff

4/27/2020

Yeah I’m also interested in the bracket. How can I buy one.?

Chris R.

4/28/2020

Like Jacob mentioned, that bracket you see was custom-made by the customer who submitted the picture. Unfortunately it's not something that's available on our site.

Answer 1

Hi Glen, It will depend on what the GVWR (gross vehicle weight rating) is of your trailer to determine which B&W 5th wheel to gooseneck adapter will work best for you. Fifth wheels and gooseneck trailers go off of pin weight instead of tongue…

view full answer...

Answer 2

When people install truck bed tool boxes like the part #UWS08298 in the bed of trucks like your Tacoma normally holes are drilled through the floor of the box and the truck bed and hardware is ran through both which secures it. We have this as an…

view full answer...

Answer 3

Hey Todd. The Tekonsha Prodigy RF Wireless Brake Controller item #TK94FR will indeed work with the factory 7-Way connector on your 2022 Mercedes GLS. The only issue you may encounter is if your trailer has LED lights. If so you'll also need the…

view full answer...

Answer 4

Since your 5' x 10' traler has a V-nose, we recommend going with the Adco SFS AquaShed Trailer Cover For Trailers up to 12' Long #290-46002. This will allow a bit of extra room for the V-nose. With the included straps on the front and…

view full answer...

Answer 5

I recommend starting off by measuring to see exactly how large of a toolbox that you will need. I have included a link to all of our A-frame toolboxes for you to take a look at. Two of our largest boxes are the DeeZee Specialty Series Trailer Tongue…

view full answer...

Answer 6

Hey Tristan, I wasn't able to get my hands on the DeeZee Specialty Series Trailer Tongue Tool Box #DZ91717P and I haven't gotten a response back from DeeZee yet so I went out and measured the opening on the Buyers Products Trailer Tongue…

view full answer...

Answer 7

Extang EnCore Hard Tonneau Cover EX62450 will use different rail styles than the TruXedo TonneauMate Truck Bed Toolbox #TX1117416 so they are not directly compatible. You could customize mounts, let the toolbox rest on the bed, or use the TruXedo…

view full answer...

Answer 8

Good question! The etrailer trailer tool box #e44VV is made over seas, but I do have a couple made in America options listed below. They are fairly similar and I think they might be of interest to you, since the name you entered is Usaforme. DeeZee…

view full answer...

Answer 9

Thanks for the picture! A standard 20 lbs propane tank is just under 18" tall so the DeeZee Specialty Series Trailer Tongue Tool Box item #DZ91717P is not going to work because it is only 17" tall. A standard 20 lbs propane tank is…

view full answer...

Answer 10

I have edited a photo showing the interior dimensions of the DeeZee #DZ6535P. The interior measures 31-1/2 inches long by 12-1/2 inches wide by 11 inches deep. The opening at the top is 31 by 10 inches.

view full answer...

Answer 11

To install the Front Hitch part #65048 on your 1997 Jeep Wrangler TJ you will use one of the holes on the bumper and then also use one of the sway bar bushing bolt holes. Check out the picture I attached for more info. I also attached a link to the…

view full answer...

Answer 12

I am unaware of any specific place that has a spacer/extender which will work for your application in regards to the Loadstar ST175/80D13 Bias Trailer Tire with 13" Galvanized Wheel #AM3S130 rubbing your trailer frame. We do not recommend the…

view full answer...

Can Storage Boxes be Mounted on Front of V-Nose Trailer

Product Page this Question was Asked From

Continue Researching