Will Optronics LED Combination Lights Work ON 2023 Shoreland'r Trailer

Updated 08/31/2026 | Published 08/30/2026

Products Featured in This Question

LED Combination Trailer Tail Lights - Submersible - Driver and Passenger Side - 25' Wire Harness

(3507)

$79.87

LED Trailer Mini Clearance and Side Marker Light with Grommet - Submersible - 1 Diode - Amber Lens

(1340)

$7.90

Optronics LED Clearance or Side Marker Light - Submersible - 3 Diodes - Rectangle - Amber Lens

(3141)

$13.10

Question:

I have a 2023 Shorelandr trailer for my 2023 19 ft Yamaha SX190. Would these trailer light work with my original trailer lights. TLL16RK I also need the two small amber clearance lights that are by wheel well. I would all of them sealed with LED lights. Thanks

asked by: Jeff S

Expert Reply:

Hey Jeff, welcome back! The Optronics LED Trailer Light Kit # TLL16RK will work well on your ShoreLand'r as long as the size works for your mounting locations. The lights measure 8-1/16" long x 2-7/8" tall x 2-13/16" deep, and they're completely sealed and submersible.

For the small amber lights by the wheel wells, I recommend the Optronics LED Clearance Light # MCL95AB. These are also sealed and submersible and measure 2-1/8" x 1-1/8" x 1-1/16". If you were looking for a different size or mounting style let me know in the comments and I'll see what else is available.

Did you add the marine slides to your trailer yet?

expert reply by: Robin H

LED Combination Trailer Tail Lights
(click to enlarge)

Jeff S.

8/31/2026

Thank you

Robin H.

8/31/2026

@JeffS you're welcome, happy to help!

Jeff S.

8/31/2026

Hi as for the small amber clearance lights mine are smaller and round but I did see mini ones also but they might be too small. Should I go with the slightly bigger round ones. OPT73KB

Robin H.

8/31/2026

@JeffS I would get the # MCL10AKB since they're sonically sealed. Same 3/4" size. I don't think we have any that are smaller but it wouldn't be too difficult to enlarge the existing hole to mount them.

Jeff

8/31/2026

Would this clearance light need to be spliced. Or does the original shorelandr trailer have a 3 prong plug

Robin H.

8/31/2026

@Jeff this is designed to be spliced, should be fine with a heat shrink butt connector. I don't have a way of knowing what kind of connectors were originally used on those lights.