Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Hey Willyd, it looks like you have a 7-way round connector which is a bit more rare and for that we only have a 7-way to 4-way adapter like the part #47405. Does your trailer with a 5-way actually use the 5th circuit? If so what is it for?
view full answer...Hey Ramiro, thanks for reaching out! The 24x84 etrailer Enclosed Cargo Carrier for RV Bumper #e94VV weighs in at 185.60 lbs.
view full answer...Hey Rene, so the ramp door springs like the part #M394FR are not all identical in spec and capacity. So what that means is a double spring setup does not mean it's just the same spring on both ends compared to a single spring. This is why the…
view full answer...I do have an option for you but the Miro-Flex LED Trailer Side Marker Light and Mid-Ship Turn Signal is not offered with a red lens, only amber part #MCL48AB and clear part #MCL48CAB. For a similar clearance light has turn signal capabilities I…
view full answer...Hey Matt, so the etrailer enclosed carrier part #e54VV does tilt back with the hinge that is built into the shank of the carrier. Jeep Wranglers have rear doors that swing out so I would not anticipate this being able to tilt enough to fully allow…
view full answer...I may have another option available for you, but I spoke with RoadActive Suspension and their Custom Leaf Spring Enhancement Kit #RAS2691 cannot be used with Deaver springs. They said they had tried to get them to work in the past, but they have…
view full answer...Thank you for providing the specs for the suspension components that you already have. Correct hanger spacing really depends on the components being used such as springs, hangers and equalizers. Most of the hanger spacing dimensions that we have are…
view full answer...Hey Andrew, The CE Smith Trailer Axle Beam with Studded Hubs #CES84XR is a 1-1/2 inch square axle tube.
view full answer...If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…
view full answer...According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…
view full answer...I would start by inspecting the connector on your trailer and the vehicle to make sure there is not corrosion in the connector which could be causing a bad or weak connection. If there is corrosion in the trailer side connector, you would need to…
view full answer...Yes we do have a red version of the #CE36ZR with the part #328-003-183RR.
view full answer...Filter Your Search
Contact and Help