Torque Spec for Blue Ox Hitch Installation

Question

Question:

What size torque wrench do I need for the installation?

asked by: John P

0

Expert Reply:

Hi John; Blue Ox uses the chart below in the instructions for the Blue Ox Trailer Hitch Receiver # BLU95UR. Since this uses 1/2”-13 x 4-1/4” Hex Head Bolt, Grade 8 you need a torque wrench capable of 119 ft/lbs. A 1/2" Drive like # PTW3001C would be appropriate.

expert reply by: Robin H

0

Blue Ox Torque Chart
(click to enlarge)

Robin H.

11/3/2025

Hey John, how did things go with the Blue Ox trailer hitch receiver once you used the 1/2" drive torque wrench? Knowing how it worked out could help others getting ready for the same install.

Reply

Answer 1

Hey Mike, thanks for reaching out! The max tongue weight is determined by the lower number in any given situation. Since your 2024 Ford Bronco has a max tongue weight rating of 350 lbs that will be the limiting factor, even if you use the Blue Ox…

view full answer...

Answer 2

Hey Mike, to add trailer wiring to your 2024 Ford Bronco you will need one of two kits. You would want the part #C42WR if the vehicle has LED taillights or the part #C87BR if it didn't come with LED taillights.

view full answer...

Answer 3

Hi Derek! The Draw-Tite #DT47YR has not yet been confirmed to fit by Draw-Tite which is why we have it listed that way. It probably will fit since it works with the 2021-2024 models but I can't guarantee it. One way or another, I would get the…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

The best option to add a hitch to your 2023 Ford Bronco is the Curt Trailer Hitch item #C76WR. This hitch is custom fit and bolts to your Bronco with included hardware. This is a class III hitch with a 2" receiver. It has a 3,500 lbs towing…

view full answer...

Answer 6

Hey Michael, the threaded hitch pin included does not have a optional lock. To add a lock to the Swagman Swivel Hitch Extender item #S86SR you'll want the Locking Anti-Rattle, Threaded Hitch Pin for Swagman 2" Hitch Racks item #S64027. This…

view full answer...

Answer 7

Hey Eric. You're looking for the Dexter 9-28-5 Brake Drum. This is the one designed for ABS brakes. We do not carry it.

view full answer...

Answer 8

Hey Terry, I went out to the warehouse and got both the Curt #C32NR and Hopkins #HM40978 in my hands to see which was the stronger option. Both brackets are the same thickness but the Hopkins bracket has two indentations in it that give it more…

view full answer...

Torque Spec for Blue Ox Hitch Installation

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching