Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
This item does not fit your vehicle
2014 GMC Terrain
These items fit your vehicle
2014 GMC Terrain
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
Specs:
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
California residents: click here
Hitch receiver bolted up as advertised. I did need to pop off the wiring cable clips as not to pinch them with the bolts. I re-attached them when I finished torquing the bolts. Looks well made and quite substantial. Recommended to my son for his Jeep….
Solid hitch, well made with not a scratch or machining mark on it (seems like it has a thick and very durable coat of paint on it as well). Installation on a '25 Bronco Badlands was fairly straight forward and followed the enclosed instructions. I will note that I did not have to disconnect the two electrical connectors (per the instructions) as I was able to pull the rear bumper just far enough away from the frame so that I could access the bolts on Ford's steel box that protects the wiring harness and then bolt on the Hitch. Also, the Hitch slips over the frame member without any slop, so no need to shim up with washers (like some other hitches apparently need). It took me about an hour working alone but someone else could probably get it done in half that time.
The receiver showed up on time and packaged well. Mounted it on our Bronco to haul bikes and works well.
Easy to install and looks good if using for trailering. Not sure how it would work with other accessories that need to be behind spare tire. But definitely perfect if you are worried about hitting knees when loading back.
When i red the instructions saying i would have to remove the rear bumper, i was like ..... but i did the whole job in 10-15 minutes. really. it looks OEM, and even had a spot for me to attach the trailer tow wiring harness. The 4 bolts look burly and I have every confidence this will move my big trailer around the yard. thanks!
Heavy duty and easy to install!
Just fine!
The instructions aren’t quite right for a 2025 Badlands. You need to remove the bumper and that means removing electrical connections on each side, removing the bolts at the tow points - 2x 18mm each side plus the plastic thing, and one each side 13mm. Then remove and dispose of the electrics metal cover. Easy once you know which ones.
Super easy install (like 5-10 minutes) and very high quality. I did not torque to the recommended value because the frame is boxed and it did not appear to have sleeves, but all I will be doing with the hitch is hauling bikes and using a Twistep dog loading device.
Rik
10/15/2022
Fit and finish is still intact and the passivated zinc fasteners are holding up...no complaints whatsoever! I do believe other companies have come up with similar solutions, and similar products can be found that are less expensive...but some of them require removal of the rear bumper this product does not.
High-quality construction, attractive welding and heavy powder coat are part of this products build. Hardware is coated and fit and finish was perfect.
Relatively straightforward install. I had to loosen my bumper to remove a factory bracket first. The hitch installed with 4 bolts. It called for torquing to 110 which is no joke, you will need a beefy torque wrench for that.
This hitch had the usual Curt quality, fit and finish. Hardest part of the installation on my '25 Bronco Badlands was getting the metal cover off that Ford installed to protect the electrical plug for the trailer lights. Other than that the installation was super easy.
arrive quick as ordered
Hitch is awesome, looks good and easy to install but……..
The part you have to take off before you install the hitch was needless to say ridiculous. They must have used 1/2 gallon of red lock tight and a air impact wrench because geez…
Good fit, good price
very easy install. works as it should.
Hitch receiver arrived as described. Took a few minutes to install and am sure will work well for the bike rack.
Awesome well made hitch
Install was very easy, clear instructions, and good quality hardware. Nice quick upgrade for Bronco and reasonable price!
Itvwill work great for our ebikes
Very durable, easy install. My wife (her Bronco) did the install and I helped (she didn't know how to use a torque wrench). Task was complete in under fifteen minutes. Over fifty percent savings compared to buying from Ford.
The hitch fit perfectly on my 2023 Ford Bronco
A quality trailer hitch from Curt and eTrailer.com. Easy to install on my '23 Ford Bronco
High quality hitch. Easy to follow instrucitons and video for install.
Hitch was very easy to install no need to take bumper off
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Nick S.
10/13/2025
That is great to hear! I am glad it was a simple install and we had a video to help. What are you planning on using the hitch for?