Replacement Hubs for Hadco Eng 440 Hubs
Updated 01/05/2026 | Published 09/15/2024
Products Featured in This Question
Question:
Looking for hubs and e-brake drums. I think Im close with the exception of the outside bearing size. Original is M12469 with a id of ~.85. Any help is appreciated.
asked by: Jonathan
Expert Reply:
Thanks for the picture and the information Jonathan! I am sorry like you I can not find anything that has an outside bearing that measures .85.
The only solution I have to offer you is to cut off your spindles and replace them with the #84 Spindle for 3,500-lb Trailer Axles item # TRU64FR. Then purchase corresponding hubs that work with the new spindle size.
The Easy Grease Trailer Idler Hub Assembly for 3.5K Axles item # AKIHUB-545-35-EZ-K would work great and they have a 5 on 4-1/2 lug pattern like the item # AKIHUB-545-35-G-EZ-K you were looking at.
For a hub with a brake drum you would want the Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles item # AKHD-545-35-EZ-K. Then item # AKEBRK-35 for brake assemblies.
Product Page this Question was Asked From
Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Idler Hub
- EZ Lube
- L68149 / L44649
- Marine Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Shop: Brake Controller
- Search Results: trailer breakaway kit
- Shop: etrailer Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3,500 lbs
- Q&A: Hadco 3077 Grease Seal Replacement Recommendation
- Search Results: trailer brake controller
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Shop: Dexter Oil Seal - Double Lip - I.D. 1.687" / O.D. 2.561" - 3.7K to 4.2K Axles - Qty 1
- Shop: Redarc Tow-Pro Liberty Brake Controller w/ Custom Harness - Dash Knob - Up to 2 Axles - Proportional
- Search Results: m12649
- Search Results: timken
- Search Results: hadco
- Shop: Timken Bearing Kit for 3,500 lb Axles with #84 Spindle - Bearings L44649/L68149
- Video: Installing the Dexter Double Lip Seal for 3,700-lb Marine Hubs
- Video: All You Need to Know About the Double Lip Seal for 3,700-lb Marine Hubs
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-3/4 - Pre-Greased
- Shop: Dexter Electric Trailer Brakes - Parking Brake Ready - 10" - Left/Right Hand Assemblies - 3.5K
- Q&A: Replacement Grease Seal # 3077 With 2.56-Inch Outer Diameter and 1.74-Inch Inner Diameter
- Search Results: redarc trailer brake controller
- Q&A: Replacement for Hadco 10" x 2" Electric Brakes
- Q&A: Will the Electric Trailer Brake Kit - 10" - 3,500 lbs Work with Hadco 440 Hubs
- Article: Testing Breakaway Systems
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Video: Set Up The Curt Replacement OEM Trailer Connector - 2025 Chevrolet Colorado
- Video: Smooth, Safe Braking – Redarc Tow-Pro Liberty Brake Controller Install on 2020 Nissan Pathfinder
- Video: Redarc Tow-Pro Liberty Brake Controller Review RED24FR
- Video: Hands-On with the etrailer Hub Bearing Kit
- Shop: Trailer Wiring
- Video: Installing the Curt Replacement OEM USCAR Trailer Connector on a 2024 Ford Bronco
- Q&A: Torque Specifications for Redline U-Bolt Kit APUBR-1
- Shop: Trailer Hitch
on Trailer Hubs and Drums
Jerred H.
1/5/2026
Hey Jonathan, how did things go after switching to the new #84 spindles and matching hubs? Your results could really help others trying to replace older hubs with that uncommon bearing size.