Search: trailer brake controller > Trailer Brake Controller >
Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…
view full answer...Hey Jack congrats on the new Jeep! To flat tow a 2021 Jeep Wrangler Rubicon behind your 2012 Thor Hurricane 31J motorhome, I recommend the following parts: Tow Bar and Safety Chains - etrailer XHD Non-Binding Tow Bar for Roadmaster Direct-Connect…
view full answer...Hi Cory, can you tell me the specific part numbers and which measurements you want exactly? I only see that you looked at some Trimax HD ball mounts, and I want to make sure I'm getting all of the measurements you're looking for and on the…
view full answer...Hey Lonnie, for a 14 inch trailer tire the tallest size is the 215/75-14 which is 26.7 inches tall like the part #KE53KV. If you wanted something 31 inches tall you'd have to bump up to 16 inch diameter wheels like with the size 235-80-16 but the…
view full answer...Actually, the P3 now has the upgraded axis accelerometer like the P2. The Tekonsha P3 Trailer Brake Controller #90195, will work with both electric over hydraulic brakes on the trailer as well as electric brakes. It has a menu option on the display…
view full answer...If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…
view full answer...Hey John, yes the brake controller wiring that comes with the 7-way kit part #22112 that you referenced will work with the Tekonsha Voyager brake controller part #TK26BR as it uses the same connector. Do you have the Voyager already?
view full answer...Hey Ryan, welcome back! A brake controller will cover anything with brakes and then you will also need a ball mount. The #C57DR you were looking at will work, but you don't really need all of that. The sway bar would be a permanent addition to a…
view full answer...Hi there Chris, great question. Yes the Redarc #RED87CR is truly a plug and play brake controller for your 2026 Ram 1500. It connects directly to the factory tow controller connector under the dash, so there’s no dealer programming required like you…
view full answer...Both the Curt Trailer Hitch Receiver #C92WR and Stealth Hitches #SH87FR will fit your 2021 Volvo XC60 Recharge Plug-In Hybrid. The Curt is a Class III hitch with a 2" receiver. It has a maximum gross trailer weight of 4,000 lbs and tongue weight…
view full answer...You're right, the mounting bracket is unique (in a good way) for the Curt TriFlex NEXT Trailer Brake Controller #C24VV. The bracket is smaller and all you do is put the included adhesive tape on the bracket and stick it wherever you like under…
view full answer...We can get you everything you need for towing with your 2017 Toyota Sienna XLE. By plastic shield, I believe you are referring to the appearance panel underneath the Sienna, and that will have to trimmed a bit in each of the hitches available for the…
view full answer...Filters
- 204 results
Vehicle Fit
Filters
