Recommended Flat Towing Parts for a 2024 Jeep Wrangler Unlimited

Published 08/23/2023

Products Featured in This Question

Roadmaster Direct-Connect Base Plate Kit - Removable Arms

(3600)

$575.00

Roadmaster 7-Wire to 6-Wire Flexo-Coil Kit

(266)

$106.37

Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Way to 6-Way Coiled Adapter Cord

(3509)

$157.40

Roadmaster Falcon 2 Tow Bar - RV Mount - 2" Hitch - 6,000 lbs

(422)

$850.00

RoadMaster 68" Single Hook, Coiled Safety Cables - 6,000 lbs

(673)

$74.20

Roadmaster Stop Light Switch Kit

(696)

$64.36

Roadmaster Smart Diode Kit for Variable Voltage LED Tail Lights

(359)

$151.80

Demco Air Force One Flat Tow Brake System for RVs w/ Air Brakes - Proportional

(562)

$1399.00

Demco Stay-IN-Play Duo Flat Tow Brake System for RVs w/ Hydraulic Brakes - Proportional

(830)

$1245.50

Question:

Can you get me a list of parts so I know what I need to flat tow a 2024 Jeep Wrangler Unlimited?

asked by: Louis

Expert Reply:

To flat tow your 2024 Jeep Wrangler Unlimited you will need the following parts:

Tow Bar and Safety Chains - Roadmaster Falcon 2 Tow Bar item # RM-520 and item # RM-643

Base Plate Kit - Roadmaster Direct-Connect Base Plate Kit - Removable Arms item # RM-521453-5

Wiring Harness - Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit item # RM-15267. This diode kit allows you to use your Jeep's tail lights and wiring system while preventing feedback from your RV. This kit will come with a 6-way socket for your Jeep as well as an adapter cable to go from the vehicle to the motorhome.

Please note that if your Jeep has ParkSense Proximity Sensors then you will need the Roadmaster Wiring Kit with Smart Diodes for Variable Voltage LED Tail Lights # RM47ZR and the Roadmaster 7-Wire to 6-Wire Flexo-Coil Kit # RM-146-7.

Supplemental Braking System - SMI Stay-IN-Play DUO Supplemental Braking System item # SM99251 or item # SM99243 if your motorhome has air brakes.

You will also need the Roadmaster Stop Light Switch Kit item # RM-751490 to ensure that your supplemental braking system is properly positioned and working effectively. This kit activates your RV's monitoring system to alert you when the brakes of your towed car are being applied.

High Low Adapter - The tow bar needs to be within 3" of level. If you measure the height of the inside top of the hitch receiver tube on your RV, and the height difference is more than 3 inches above/below the base plate tab height, you'll need a high/low adapter. I have linked a FAQ article that explains all this in more detail along with our selection of adapters.