To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
The Adarac Custom Truck Bed Ladder Rack gives you 500 lbs of raised cargo capacity without losing access to your bed cover. You can load ladders, lumber, or pipe during the week, then strap on kayaks, canoes, skis, snowboards, or hunting gear when it’s time for the weekend. The elevated crossbars sit above the cab to keep long gear clear of your rear view, while your truck bed stays open for everything else you need to bring along.
If you use an inside-the-rail tonneau cover, you don’t have to choose between covered storage and overhead hauling. This rack mounts to the stake pockets on top of the bed rails, so it works with inside-the-rail covers like Access and similar designs. That means you keep your weatherproof cargo area while gaining tall cargo capacity up top.
This rack combines black powder coated steel uprights and rails with extruded anodized aluminum crossbars. That mix gives you strength where it counts and corrosion resistance that stands up to years of use. The finish protects against rust, fading, and chips, so the rack keeps looking good even after long exposure to the elements.
Full-length slotted utility rails run along the bed, giving you multiple tie-down options for cargo in your truck bed. The square 1-1/2" x 1-1/2" crossbars include mounting channels along the bottom for attaching accessories, and the upright bars have built-in tie-down points at the top. You can also move the uprights along the rails to fit longer or shorter loads, so everything rides secure and balanced.
The Adarac mounts using stake pocket inserts—no drilling or welding needed. It bolts to the top of the bed rails for a clean, factory look, and you can remove the rack whenever you need to clear the truck bed for tall loads. With its solid fit and simple setup, you can go from jobsite to weekend adventure without any hassle.
Ratings & Reviews
Good product, very sharp edges on top bars though, be careful!
Excelent , Perfect for 2 kayaks, several ladders and lumber. Also evry easy to take down when I need them off.
Great service. Excellent product.
Used it heavily the last year. Held up my rooftop tent during my entire month long roadtrip. Easily held over a thousand pounds of weight. Comes off quick if you need to use the whole bed of your truck.
easy to install, looks good. carries my kayaks just fine. a cushion for the cross rails would be a nice option. I used pool noodles wrapped with iron pipe wrap
Very well built and easy to install. Looks much nicer the the tubular rack on my old truck. I love that I can use this with my tonneau cover.
We have had our Adarac for a year now.
A great product and very versatile from carrying overhead equipment to tie downs for ATV's.
Best ladder rack I have ever purchased, hands down. Better than the TracRac, and only half the price. Quality is by far better than any other. Easy set up and take down. Wish I would have bought this one years ago!!
very good rack. I have a rolling tonneau cover on my truckbed and had to modify the rails that partially covered the stake holes. Once done, it fit it well and now I can have secure materials in the bed and oversize on the rack. Strong and stable.
This Ladder Rack mounted easily on my 2017 1500 Silverado and allowed full use of my roll up metal bed cover. It looks stylish and easily handles my 16 foot canoe. Installation was easy and the rack is easily removed when not needed and the side rails make great tie points for securing cargo in the bed.
I bought the Adarac Aluminum Crossbar Series Ladder Rack a year ago to use for hauling kayaks and it has worked well. It is sturdy, was easy to install, and looks decent on my truck. The paint has held up well. I was able to haul my kayaks from Pennsylvania to Florida and back with no problem. People have stopped me in parking lots asking about the ladder rack. I got a quality product at a reasonable price. The only negative thing I'll say is the ladder rack whistles sometimes. This happens when you get a strong crosswind but the noise is tolerable.
Chose this rack because it is compatible with the Access Lorado Tonneau Cover. The rack is very well made and simple to install and remove, which I do often due to fifth wheel towing. I use this rack often for ladders and canoes, as well as long length construction materials. Etrailer is lightning fast with shipping, customer service is great and their prices, including free shipping, cannot be beat. Very satisfied with Etrailer and the Adarac!
This rack works awesome for hauling our two kayaks while towing our camper. Very easy to put on and take off. Highly recommended.
I installed the rack this morning with no issues. Simple process that took about an hour only because I am picky about everything being square, even and perfectly placed. I was surprised that the unit was as heavy duty as it is. I was expecting something much lighter in gauge of steel. It sits very sturdily on the truck with zero movement. Even my wife thinks it looks rather stylish (neither of us wanted the work rack look).
Thanks for the great service and follow up after the sale to let me know it had shipped, you received notification of delivery, and how I liked the product and install. I've learned through experiences that this is the kind of service one can expect from etrailer.com.
Super easy to install, very sturdy! I found that it worked great for my canoe! I especially love the adjustability of the rack, and all the tie down holes in the base rack for bungies. I wrapped some pipe wrap up top, and used some C-clamps to customize... or you can pay big time for the yuppie version. This is better than the 1 x 2 / 4 x 4" lumber redneck version, and a lot cheaper than the brand name rig. I highly recommend!
Well packaged by shipper and no damage occurred to the racks during shipping. Easy to install and solid product. I had to slightly modify to fit my roll back by grinding about a 1/4" off the box side of the rails. If not for the need to use a grinder on these install would've taken about 15 minutes. No big deal either way. Looks good and these racks will do what I need them to..... Haul Ladders. Next I will be installing the rack em racks on my enclosed trailer.
I have no complaints, love it!
Great product, sturdy and installed in about an hour. Would definitely purchase again.
Awesome product. Very sturdy. Will work with Backflip G2 cover installed
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.