Trailer Hitch Receiver Compatible With a 2014 E-450 RV Motorhome Cutaway Chassis

Question

Question:

Hello, i am looking for the mounting hole dimensions for this hitch. thank you. Or if you cant point me to a rear hitch that fits a 2014 E-450 motorhome. thanks

asked by: Nick

0

Expert Reply:

For your 2014 Ford E-450 RV Cutaway Chassis you will need to use a universal receiver like the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver. This receiver is available with 7" Brackets # 41990-07 or 16" Brackets # 41990-16 depending on the height needed for the rear of your motorhome. There is not a custom fit receiver for the cutaway chassis as frame changes and is not the exact same for every motorhome made.

expert reply by: Bud M

0

Answer 1

Yes you should use some kind of sealant on threaded fittings whether it is the tape or pipe dope. We recently had a propane manufacturer visit us for training so I can say for sure that yes you should use a sealant on threaded fittings. No sealant…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 5

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 6

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 7

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 8

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 9

Hey Melvin, we have the Curt front hitch part #31053 that is a fit for your 2014 Ford E450 Class C motorhome and would work great to carry a bike rack with. Do you have a bike rack already?

view full answer...

Trailer Hitch Receiver Compatible With a 2014 E-450 RV Motorhome Cutaway Chassis

Continue Researching