Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
This item does not fit your vehicle
1992 Ford Ranger
These items fit your vehicle
1992 Ford Ranger
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This hitch is built for real towing and hauling, not just light-duty tasks. With a 6,000 lbs maximum gross trailer weight and 600 lbs maximum tongue weight, it handles small campers, boats, or loaded utility trailers without breaking a sweat. When paired with a weight distribution system, those numbers go up to 8,000 lbs GTW and 800 lbs TW for even more capability. The 2" x 2" receiver opening works with most ball mounts, bike racks, and cargo carriers so you can switch between towing and gear-hauling setups easily.
There’s no need for welding or special tools here. The fully welded design bolts right to the frame using factory holes, and it comes with the full hardware kit and step-by-step instructions. That means you can install it at home in the driveway with basic tools instead of paying for shop time. Precision robotic welding ensures the hitch lines up exactly where it needs to be, giving you both strength and a frustration-free fit.
The gloss black powder coat finish sits over a protective base coat to keep rust at bay through years of use. The round-tube design adds a clean, finished look under your bumper while keeping the cross tube visible for easy access. Whether it’s exposed to rain, road salt, or gravel spray, this sturdy steel hitch stays tough and solid after every trip out.
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
Ratings & Reviews
Simple installation. Perfect fit. Took half the time indicated on instruction sheet.
Very satisfied with etrailer. Not the first time ordering from them and never disappointed.
hitch for 2007 E-350 vanThe lady who took my order was knowledgable, helpful, and kind while doing it. The hitch went on perfectly in about a half hour. I used it to bring home my wife's grandpa's 1957 Chevy which had been in a barn for 35 years! Thanks!
hitch for 2007 E-350 vanThe lady who took my order was knowledgable, helpful, and kind while doing it. The hitch went on perfectly in about a half hour. I used it to bring home my wife's grandpa's 1957 Chevy which had been in a barn for 35 years! Thanks!
I was a little freaked out at first. It looked like it wouldn't fit. Then I had the brilliant idea to drop the spare tire. It fit like a glove. I installed it single handedly thus becoming a hero to myself. Thank you. Now I need to pick out a bike carrier. I'll be back. BY the way, great service. So easy. You couldn't make it any simpler.
hitch was perfect fit, estimated 30 minute installation was actually more like 10 minutes. shipping was quick. nice looking on the van with round tubing style. If only my son-in-law didn't put that Georgia bull dog insert in the hitch - - - - - - - - .
I'm taking the time to write this because of the wonderful customer service I received from etrailer.com. Dana M really knew her stuff and greatly helped me with the ordering process. She assisted me with selecting the proper equipment for my vehicle even though I was uncertain which wire harness to get. The order shipped that same day and arrived carefully packed in a few days. Everything installed in 30 minutes with no problems at all. I will be telling everyone I know that needs trailer equipment to use etrailer.com.
Fit perfect....no glitches on install...only anomaly the 2" opening in receiver abt 1/16"large allowing ball assembly to rattle even loaded...not a problem on my part but could annoy some people...not a safer issue...pleased over all!
The fit is great. I chose this hitch because it is contoured to fit the frame with a washer needed to space one bolt on each side. Other hitches did not seem specifically made for my E-350. Price is fair and the shipping was fast. I also installed the Curt plug and play harness, which was very easy.
This was not my first E-trailer order and will not be my last.
Perfect Fit with little work to attach. I have used it to pull all kinds of trailers and equipment over the year. With the exception of a few scratches it looks almost new.
The hitch that i purchased is better looking than i expected, it took me less than 30 minutes to install, no drilling required. The light harness couldnt been more easier to install. Now i can tow my gear every where! With my Ford 2011 E350
Etrailer.com make buying gear for your vehicle easy , even when your not sure what products work best for you. Plenty of information
Love the videos and fotos.
purchased a curt 13055 trailer hitch for my 2012 ford E250 van when i went to install it the holes didn't line up. they were 1/2 inch off center in the rear and 1 1/2 inches off in the front. when i called to inquire about the miss fit i was told to try to strech the hitch to make it fit. so either i have to gouge the holes in the frame larger or sent it back. i think i will send it back.
Took about 1/2 to install by myself. Used two 18 high storage totes as my helper. The thing is pretty light and was easy to handle. Bolted up with no issues. It clears the spare but not by much; maybe a 1/4 inch or so. I have basically stock tires. Van has a basic flush bumper (not a step) so hitch is definitely a knee knocker. The receiver area is now painted bright orange. My cargo carrier fits fine, doesn’t go though to spare.
I purchased this trailer hitch for a 2012 ford e350 extended length passenger van.
The website contained the information I needed to pick the right hitch for my van and it was easy to order. It arrived in about 1 week.
I have a spare tire under the rear of the van that winches up and down and I was concerned about a good fit with the tire. It was a perfect fit with the holes pre-drilled in the van and it was very easy to install, about 1/2 hour. The spare tire fits snugly to the back of the hitch like it should and it was easy to do by myself since the van has enough room to work under it. I'm very happy with the service and the product.
We bought the hitch for a van conversion project we did last winter. My 4 year old grandson helped me put it on by lifting it on a floor jack while I put the bolts in. The install probably took 15 minutes as it fit like a glove but we fooled around and laughed and it took us about 40 minutes. The quality was excellent and we used it a lot this summer towing our cargo trailer and our storage rack. Delivery was quick with no damage or scratches
Exactly what I needed to replace an existing hitch on my Ford e350 Quigley Van- direct fit install, simple and fast. Once again e-trailer comes thru with the fastest shipping around.
Vinnie
3/25/2024
After one year…..perfect! Has endured 100’s of hours on beaches and showing zero signs of wear or rust
I purchased the Curt trailer receiver for my 2000 Ford E150 van. Purchased item online and had fast delivery. Installation was very easy, did not need to drill. Also, was a one person installation.
Jeff T.
9/12/2017
Still looks good. Some paint fading but I live in an area that uses a lot of salt and I dont wash as much as I should.
I received my Curt hitch receiver quickly and packed really well. I am really pleased with the quality of Curt's products and very happy they are manufactured in the United States by an American manufacturer. I have always been able to depend on etrailer for excellent service and quality products.
Russ
10/17/2022
Still every bit pleased. The paint finish is durable and glossy, helping keep it clean and free of oxidation.
Hitch was as ordered. Fit perfectly, easy to install
Great prices
Great service
Great company to deal with and my new go to for hitches
Works as it should. Was also a pretty strait forward installation. Would buy again.
One of the easiest trailer hitch installations I have ever done. For my 2014 E350 it took 29 minutes from sweeping the floor and gathering the two wrenches to putting the box and protective wrapping into the recycling bin. The hitch itself was boxed and protectively wrapped and it arrived undamaged. Better prices, delivery time, and shipping condition than Amazon reports for a competing hitch manufacturer.
Bought this hitch specifically because it was a no drill application and it is made by Curt.
I've had Curt products in the past and have always been pleased with their quality and performance.
This hitch was no exception. It fit perfectly on my van, and all of the holes lined up perfectly with the frame holes. I used the grade 8 bolts and nuts in the package and installed the hitch by myself in 45 minutes. The fact that it was really well priced and came with an awesome electrical connector and bracket was just icing on the cake!
Fit perfect. drop the spare tire and bolt it on.
The hitch was great! Came right on time, easy to install and a nice hitch to boot!
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Roy
5/9/2022
The only problem I have is that is drags a little on the driveway hill when the van is fully loaded. Other that its supper