Parts Needed For Adding 7-1/4 Brakes To Trailer With 2,000LB Axle
Updated 07/14/2022 | Published 07/13/2022
Products Featured in This Question
Question:
what is the difference on 7x1.25 drums 5 on 4.5 pattern between L44649 bearings and L44643 and how to tell which is needed when adding 7x1.25 brake to my trailer?
asked by: Gary V
Expert Reply:
The Easy Grease Trailer Hub and Drum Assembly for 2K Axles # AKHD-545-2-EZ-1K includes the 1" inner diameter Bearings # L44643. The Assembly # AKHD-545-2-EZ-2K includes the 1-1/16" inner diameter Bearings # L44649. To determine which ones will fit your axle you will need to remove the grease cap and spindle nut to find the number on the outer bearing. If there is not one of the bearing numbers stamped on your bearing you will need to measure the spindle using a Digital Caliper # PTW80157.
You will also need the Electric Trailer Brake Kit # AKEBRK-2 which includes both the left and right brake assemblies.
For the Electrical you will need a Hopkins 7-Way RV Style Connector w/ Molded Cable # HM20087, Trailer Wiring Junction Box # 3430001-JBK, Trailer Breakaway Kit # C52044 and Brake Wire # 12-2-1. The brake wire is sold per foot.
Product Page this Question was Asked From
Easy Grease Trailer Hub and Drum Assembly for 2K Axles - 7" - 5 on 4-1/2 - L44643 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Drum
- EZ Lube
- Pre-Greased
- L44643 / L44643
- Standard Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- etrailer
more information >
Continue Researching
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Search Results: rv trailer tires
- Search Results: trailer wiring
- Shop: Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Video: 7-Way Molded Trailer Wire Connector, 6' Long: The Breakdown
- Video: Install: etrailer Electric Trailer Brakes on a 2019 Grand Design Reflection 150 Fifth Wheel
- Video: Setting up the etrailer Electric Trailer Brakes on a 2017 Grand Design Reflection Fifth Wheel
- Shop: 7-Way Molded Trailer Wire Connector, 6' Long
- Shop: Bargman 7-Way, RV-Style Connector w/ 10' Heavy Duty Insulated Cable - Trailer End
- Shop: Trailer Wiring Junction Box - 7 Color Coded Terminals - ABS
- Shop: 7-Way Molded Connector w/ 18' Cable - Trailer End
- Shop: 7-Way Molded Trailer Wire Connector, 4' Long
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Q&A: Replacement Hubs/Bearings for 2000 Kendon Folding Trailer With 1-1/16 Inch Diameter Spindle
- Q&A: Availability Of 7" Hub/Drum With L68149 / L44649 Bearings And 5 on 4-1/2" Bolt Pattern
- Q&A: How Far Down are Mounting Holes of Fulton Coupler
- Q&A: Wiring a Trailer Breakaway Switch on a Trailer with an Existing Winch Battery
- Q&A: How to Determine Between 5 on 4-1/2 and 5 on 5 Bolt Patterns for Hub Covers
- Q&A: Parts Needed To Add Electric Drum Brakes To Boat Trailer
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Trailer Wiring Diagrams
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: What are the Common Types of Propane Fittings Used on RVs?