Longer Weight Distribution Shank for Achieving More Tailgate Clearance

Question

Question:

Only issue is I do not need the extra height adjustment

asked by: Charles S

0

Expert Reply:

The Curt Weight Distribution Shank, 14 Inches Long # C17122 will work well with your Fastway e2 Weight Distribution. This Curt weight distribution shank measures 14 inches from the center of the hitch pin hole to the center of the adjustment holes, and the shank is 18 inches long overall.

expert reply by: Jameson C

0

Charles S.

6/25/2020

Only issue is I do not need the extra height adjustment

Jameson C.

6/25/2020

We have the Equal-i-zer shank part # EQ90-02-4600 which has considerably less rise/drop but is longer at 18 inches so it would be the better option.

Answer 1

Hey Todd. The best way to extend your 7-way connector is to use the TorkLift Wiring Harness Extension item #TLW6021. This is essentially an extension cord for your vehicle's 7-way connector. It measures 24" long. Or you can purchase the…

view full answer...

Answer 2

Congrats on your new purchase! There isn't a hitch extender that is compatible with a weight distribution system but I do have a solution for you. You can use the Equal-i-zer Weight Dist Shank item #EQ90-02-4600 so long as you have the standard…

view full answer...

Answer 3

If you need to tow with the tailgate down so you can haul your ATV in the truck bed then the most common solution for this is to use an extended weight distribution shank, the Equal-i-zer Weight Dist Shank part #EQ90-02-4600. This should provide…

view full answer...

Answer 4

I do have a recommendation for you rather than replacing your Jack #EJ-3520-BBX with one like the Bulldog #BD500199 which can be mounted sideways. You can switch to a longer Ball Mount #BH20 or Shank #EQ90-02-4600 to move your hitch ball further…

view full answer...

Answer 5

Swapping out the shank of your Equal-i-zer WDH with a larger 18" shank would push the trailer back an additional 6" for more clearance but there's no way for me to confirm that your trailer would completely clear the tail lights on your…

view full answer...

Answer 6

Yes, you can use the Equal-i-zer Weight Dist Shank #EQ90-02-4600 with a Reducer Sleeve #325-GH-007 on your 2022 Ram 2500. I do highly recommend using a Roadmaster Quiet Hitch #RM-062 to remove the excess play from the receiver to the hitch. Having…

view full answer...

Answer 7

I assume you want to lower your tailgate with the trailer hooked up? If that's the case, I don't recommend a hitch extension as they reduce capacity and add another failure point. That said, what you can do is switch to a longer weight…

view full answer...

Answer 8

Using a standard hitch extender isn't going to be your best option because they will reduce the weight capacity of your hitch and you'll have trouble finding one long enough that is rated high enough for your 7,000 pounds travel trailer. A…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Longer Weight Distribution Shank for Achieving More Tailgate Clearance

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching