How To Determine Which Hub Is Compatible With 10" Brake Assembly
Updated 01/02/2020 | Published 01/01/2020
Products Featured in This Question
Question:
What bearings/race/seal match up with item AKEBRK-35-SA?
asked by: Michael H
Expert Reply:
The Electric Trailer Brake Kit - Self-Adjusting - 10" - Left and Right Hand Assemblies - 3,500 lbs part # AKEBRK-35-SA does not have specific bearings or seals that match up with it. The bearings, races and seal are determined by the hub. Since the electric brake assembly is 10" you will need a 10" hub to use with the brake assembly. You will also need a hub that matches the bolt pattern of your wheel. For example the Trailer Hub and Drum Assembly part # AKHD-545-35-EZ-K is 10" hub with a 5 on 4-1/2 bolt pattern with the following bearing race and seals:
Bearings (included)
Inner bearing: # L68149 (1.378" inner diameter)
Outer bearing: # L44649 (1.063" inner diameter)
Races (included)
Inner race: # L68111
Outer race: # L44610
Grease seal (included): # 58846
Inner diameter: 1.719"
Outer diameter: 2.565"
I have attached a helpful article to explain how to measure the bolt pattern of your wheel.
The bearings and seals inside the hub will need to match up with the spindle of your trailer. To know which bearings and seals you need I recommend to measure the spindle with digital calipers like part # PTW80157. You can also hub your existing bearings out of the hub and see if there is a number stamped into the side of them. I have attached a diagram for your reference.
Product Page this Question was Asked From
etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- 13 Inch Wheel
- 14 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Replacement Front Cover for Lippert Edge Awnings - Drive Head - Black
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Article: VCC Pickup and Dropoff
- Q&A: Self-Adjusting Trailer Brakes For a Lippert 4,400LB Axle On 2017 Aspen Trail 2790BHS Travel Trailer
- Shop: Lippert Electric Trailer Brake Assembly - 10" - Right Hand - 4,400 lbs
- Shop: Lippert Electric Trailer Brake Assembly - 10" - Left Hand - 4,400 lbs
- Shop: Dexter Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 2009 and Older 4.4K Axles
- Shop: Scissor Stabilizer Jacks w/ Handle - 18-3/4" Lift - 10,000 lbs - Qty 4
- Search Results: 5200 lbs axle trailer brakes
- Shop: Trailer Hitch
- Video: All You Need to Know About the Deka Heat Shrink Butt Connector
- Q&A: Replacement Trailer Brakes and Hub/Drums For a 1973 Airstream Argosy 26D Travel Trailer
- Q&A: 3,500LB Trailer Axle Self-Adjusting Electric Brakes and Hub For 13" Diameter Wheels
- Q&A: How to Wire Electric Brakes on a Tandem Axle Trailer
- Q&A: Troubleshooting Voltage Drop from 12V to 7V When Trailer Brakes are Installed
- Q&A: How to Choose the Right Brake Assemblies for my Trailer
- Q&A: Recommended Self Adjusting Brakes for Dexter 4K Axle
- Shop: Deka Heat Shrink Butt Connector - 12-10 Gauge - Nylon Insulation - Yellow - Qty 5
- Search Results: tonneau cover
- Search Results: trailer jack
- Search Results: leveling jacks
- Video: Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles: The Breakdown
- Video: Replacement Front Cover for Lippert Edge Awnings Feature Review
- Video: Detailed Breakdown of the etrailer Electric Trailer Brakes
- Video: All About the Dexter Electric Trailer Brakes
- Video: Measuring To Choose The Right Trailer Axle
- Video: Detailed Breakdown of the Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles