This yellow butt connector joins two lengths of 12-10 gauge wire. Insulated with heat-shrinkable nylon for adjustability and durability.
Features:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody, this is Jeff with etrailer.com. Today, we're gonna take a look at the Deka yellow butt connectors for 12-10 gauge size wire. This is for a quantity of five connectors. Now, these yellow butt connectors will join two lengths of 12-gauge or 10-gauge size wire. It will insulate the connection with the heat shrinkable nylon for adjustability and durability and the yellow color of this connector indicates the size wire the connector will fit which is 12 to 10 gauge size, and also if you don't remember the color, what size it fits, it is stamped on the connector, 12-10 AWG, which it's telling you. But basically when you install this, what you'll do is get your two wires and enough you'll strip about a quarter of an inch of insulation off the end of each wire that you're wanting to connect, and then what you'll do is insert the end of the one wire all the way in into the metal casing until it stops right in the very center, they do have a stopper, so you push the wire in there, once it stops you make sure it's in the metal casing there and then what you'll do is take your crimper and you'll just crimp down on that metal casing until it holds the wire in place, and then you'll take your second wire and do the same on the other side, slide it all the way in, the part that you've stripped off, slide that all the way in 'til it stops, make sure it's in the metal casing, take your crimper, crimp it all the way down.
Once your two wires are in there, what you might wanna do is pull on both wires just to make sure you do have a good connection, that they've been crimped correctly. If that's all fine, then what you'll do is you'll take a heat source like a heat gun and then just apply heat over the whole insulation and what'll happen is it'll cause this nylon insulation to heat to shrink and it'll completely seal around your connection and prevent the elements from causing any problem with your connection. Now this part is for a quantity of five connectors. We do also sell this in a single pack which is part #DW05745-1, and also as a ten-pack, part #DW05745-10. But that should do it for the review on the Deka yellow butt connectors for the 12-10 gauge size wire for a quantity of five..
Do you have a question about this Wiring?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.