See what our Experts say about this Optronics Trailer Lights

• Replacement Tail Light For Trail Star Boat Trailer
  We have exactly what you are looking for. The replacement light we offer that will work for you is part # ST16RB. This is listed as an exact replacement for the Wesbar 3554 light on your trailer, which is the passenger side of the trailer. if the light you need is for the driver side of the trailer and has the license plate light then the light you need is part # ST17RB.
  view full answer...
• Is Wire Removal Required when Replacing the Wesbar 3504 Tail Light
  If you are replacing your Wesbar 3504 tail light then there is no need to remove the wiring from inside the assembly itself. A replacement light, like part # ST17RB for the left hand or part # ST16RB for the right hand, will come with its own wiring that you will connect to the wiring on your trailer. A review video and an installation video have been linked for you to reference.
  view full answer...
• Replacement for Wesbar Passenger Side Taillight
  The Wesbar light that the replacement lens # 102641 you were looking at fits has been discontinued. The company that bought Wesbar has been getting rid of a lot of their lights so it is unlikely you will find it. However, the Optronics Combination Trailer Tail Light # ST16RB will work as a replacement. This light has the same dimensions at 8-1/16" long x 2-7/8" tall x 2-13/16" deep. We also have the driver side # ST17RB if you would like to replace the pair.
  view full answer...
• Replacement Lights for a Wesbar 102640 Tail Light
  Hey Stuart. There's a couple of different options to replace your Wesbar taillight 102640. Both of them measure measure 8-1/16" long x 2-7/8" tall x 2-13/16" deep. If you want the same incandescent bulbs you can use the following parts; Driver Side - Optronics Combination Trailer Tail Light item # ST17RB Passenger Side - Optronics Combination Trailer Tail Light item # ST16RB If you're wanting to upgrade to more efficient LED lights you'll want the LED Combination Trailer Tail Lights...
  view full answer...
• Availability of Three Wire Incandescent Bulb Trailer Lights
  Hey Jeff, you could use the part # ST17RB for the driver side and the part # ST16RB for the passenger side. These are both three wire assemblies with incandescent bulbs like you are wanting. You'd just need to cut off the 3 prong connectors you have and hardwire them like it sounds like you already knew you'd have to.
  view full answer...
• Replacement Submersible Light for a AISTLP2 93 Tail Light
  Hey Pierette, thanks for the information! To replace your AISTLP2 93 tail light, you'll want the Optronics Combination Trailer Tail Light item # ST17RB. This submersible incandescent light measures 8-1/16" long x 2-7/8" tall x 2-13/16" deep. It has stop, tail, turn, side marker, side reflector, rear clearance, and rear reflector functions along with a built-in license plate light. If you want a matching passenger side you'll need the Optronics Combination Trailer Tail Light item # ST16RB. What...
  view full answer...
• Correct Replacement Taillight for Trail Star Boat Trailer
  In order to replace the taillight on a Trail Star Trailer you'd simply find one with the same style (shape/function) and then choose the correct replacement based on size. There are several types of Trail Star Trailers so it would be difficult to offer an exact replacement without knowing what you have but most of their boat trailers use a light similar to the Optronics Combination Trailer Tail Light part # ST16RB for passenger side and part # ST17RB for driver side. These feature a two...
  view full answer...
• Replacement Tail Lights for Optronics A1STP2 93 on 2005 Trailstar Trailer
  We have both an LED and incandescent option for equivalent replacement lights on your 2005 Trailstar trailer. If you want incandescent lights then you can use the # ST16RB for the passenger and # ST17RB for the driver side. For LED lights you can use the # STL16RB for the passenger and # STL17RB for the driver side. I have attached some review and installation videos for your reference.
  view full answer...
• Parts Needed to Add Lights to 50 Foot, Triple Axle Trailer with No Existing Lights
  Thanks for the photo of your trailer! The taillights I recommend for your trailer are the Optronics Over 80 Inches, Rectangular Submersible Trailer Tail and License Light, Left-Hand # ST17RB and the Right Hand # ST16RB.These lights will provide you with the stop/brake light, tail light, turn signal, rear reflector, license plate lights, rear side marker lights, and rear side reflectors needed for trailers 30 feet or longer. For front side clearance lights and reflectors as well as intermediate...
  view full answer...
  
• Replacement Bulbs for Optronics # ST16RB Taillight
  The Trailer Light Kit you referred to uses an # ST16RB and a # ST17RB taillight, which use a 1157 replacement bulb which we offer as part # DI79VR .
  view full answer...
• Installation of Replacement Trailer Lights on Boat Trailer with Multiple Ground Wires
  If a trailer is made of aluminum rather than steel it will sometimes need ground jumper wires on each light since the aluminum frame does not always provide enough conductivity. Steel frame trailers can usually do with just one main ground wire that connects between a clean bare metal spot on the frame and a wiring junction box like # 38656 where all the individual lights' grounds will join it. Junction boxes can still be used on steel frame trailers, especially when it comes time to...
  view full answer...
  
• Replacement Tail Light for 1995 EZ Load Sea Ray Boat Trailer
  Thank you for providing that information. Based on that information you have a Wesbar 3504 light and the direct replacement is the Optronics Combination Trailer Tail Light - Submersible - 8 Function - Incandescent - Driver Side # ST17RB. This is the one with the built-in license plate light. If you end up needing to replace your passenger side light as well we also have the # ST16RB available. I have attached a review and installation video for your reference.
  view full answer...
• Replacement Trailer Lamp Needed for Part # ST17RS
  For the right side tail light assembly, use part # ST16RB. Part # ST17RB is the assembly for the drivers or left hand side. These will be an exact replacement for what you currently have. The ST17RS is the same light, sold individually. ST17RB is sold in bulk, which is how we purchase them. Each assembly has a lead for the brake/directional, a lead for the running lights and a separate ground wire.
  view full answer...
• Replacement Tail Light for 2000 TrailStar Bass Tracker Pro Boat Trailer
  I looked up some photos of a 2000 TrailStar Bass Tracker Pro Boat Trailer and it most likely uses either the Optronics Combination Trailer Tail Light part # ST16RB for passenger and part # ST17RB for driver side or the Optronics Combination Trailer Tail Light part # ST8RB for passenger side or part # ST7RB for driver. Unfortunately, you'd have to replace the entire tail light as we'd not have just the lens.
  view full answer...
• Water Gets Into Boat Trailer Taillights and Blows Fuse
  You've hit the nail on the head. When the water is in the taillights assembly, it shorts the power supply circuit to ground causing you to blow fuses. I've seen folks drill a drain hole in the lowest point of the underside of the lamp housing, but your best course of action is to prevent the water from getting in there in the first place. The best fix would be to replace the existing lights with submersible ones, like the # ST17RB and # ST16RB. These lamps are sealed to keep water completely...
  view full answer...
• Replacement Lens for Wesbar Lens Part 102641
  The Optronics Trailer Tail Lights # ST16RB (right) and # ST17RB (left) are direct replacements for Wesbar lights 3554 and 3504. The Wesbar part 102641 is actually a replacement lens, which we do offer as # 102641. The complete Webar light that replaces 3554 is # 403026 and for 3504 it is part # 403076.
  view full answer...
• Replacement Trailer Light Recommendation to Replace a Wesbar 3504
  The Over 80", Rectangular Submersible Trailer Tail and License Light # ST17RB that you referenced is an exact replacement for the Wesbar 3504 light you have so it would work perfectly for you.
  view full answer...
• Replacement Trailer Taillight Assemblies for 2015 Grizzly 1754 SC
  I looked up pictures of your 2015 Tracker Grizzly 1754 SC and it appears to have the trailer taillights part # ST36RB for the right hand side and the part # ST37RB for the left hand side.
  view full answer...
• Looking for Replacement Lights on an Older Pontoon Trailer with Wesbar 3504 Lights
  Though I do have direct replacements for the lights, this style of plug is no longer used. With that being said, the Optronics Combination Trailer Tail Light - Submersible # ST17RB will replace your driver side light and # ST16RB will replace your passenger side. However, both of these lights will have bare wires on the end so they can be spliced into your current wiring.
  view full answer...
  
• Will The Optronics Trailer Light, # ST17RB, Fit Inside The Frame Of A Leland Trailer
  The Optronics Trailer Light, # ST17RB, is an exact replacement for the Wesbar # 3504 and the Peterson # M456L lights. I do not have a list that will tell me if this light will fit your Leland trailer. You will need to look on the light you have now and see if there is a part number that might match the Wesbar or Peterson number. If you can give me the serial/model number and manufacturer of your existing light assembly, I can find if there is an exact replacement. If you want to measure...
  view full answer...
• Driver and Passenger Side 3-Wire Submersible Incandescent Trailer Tail Lights
  We do have an option for you, though the matching driver's side of the Aero Pro Trailer Tail Light - Submersible - Passenger Side ST66RPG has been discontinued and is no longer available. What I highly recommend instead is the Optronics Trailer Tail Light - Driver Side # ST17RB and Passenger Side # ST16RB because these are 3-wire, submersible, incandescent lights like the ones you asked about so they will work as perfect replacements. Since these are 3-wire lights you can easily splice...
  view full answer...
• How Do you Wire in 3-Wire Trailer Tail Lights on a 1999 Nitro 700LXB Trailer
  Virtually any three-wire tail-light assembly would work for you, since this is a boat trailer you will want to use a light assembly that is submersible. You will just need to wire the new tail lights in to your current wiring, mount the tail light and you would be good. The Optronics Trailer Light # ST16RB that you referenced would work for you. It would be the right hand side light and you would just wire it in by color and you would be good to go. For the left-hand side you would want...
  view full answer...
• Does Optronics Tail Light Lens A90RB Include a Clear Portion for a License Plate Light
  This lens is meant to be used as a replacement to the Optronics tail light, part # ST90RB. It does not have a clear portion for a license plate light. You are looking for a light like Optronics part # ST9RB or part # STL9RB. You could also use Optronics part # ST17RB. I have linked to these parts below.
  view full answer...
• Replacement Waterproof Boat Trailer Tails Lights and Switching from Incandescent to LED
  You were on the right track with the Optronics LED Combination Trailer Tail Lights - Submersible - 40 Diodes - Driver and Passenger Side # TLL160RK, which are a completely sealed light housing so they're waterproof as opposed to submersible lights. These lights do come as bare pigtail wires, but there are twist connectors included in the kit to allow you to make the connections to the trailer wiring. With that said, when it comes to mixing LED and incandescent lights on your trailer, it...
  view full answer...

Do you have a question about this Trailer Light?