Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
When you’re hauling after dark or in traffic, visibility matters. This red, rectangular tail light handles seven functions—stop, turn, tail, rear clearance, rear reflex, side marker, and side reflex—so other drivers can clearly see your trailer from every angle. Measuring 8-1/16" long x 2-7/8" wide x 2-13/16" deep, it meets lighting needs for trailers over 80" wide without requiring an extra clearance light.
Rain, road spray, or full submersion won’t slow this light down. The molded plastic housing and durable lens are fully waterproof and corrosion resistant, giving you reliable performance even in wet or harsh conditions. It’s designed for long service life without worrying about moisture sneaking in or rust taking hold.
Rough roads can shake bulbs loose in lesser lights. This one uses a shockproof socket that keeps the bulbs protected and extends bulb life. When it’s time for maintenance, the screw-on lens makes bulb replacement quick and simple—no special tools or tricky clips to deal with.
The Plug-N-Go two-wire molded connector makes setup straightforward and secure. It provides a watertight link to your trailer’s electrical harness while grounding through the frame. Universal right-side mounting on 2" centers means it bolts right up with the included hardware and gets you back on the road fast.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at part number ST26RPG. This is the Optronics Over 80" Rectangular Submersible Trailer Light for the right-hand side of your trailer. The red, rectangular trailer light is going to serve seven functions for trailers more than 80" wide such as your stop, turn, tail, rear clearance, rear reflex, side marker, and side reflex indicators. It's going to feature a waterproof and corrosion-resistant design, replaceable lens, as well as two incandescent bulbs. The bulbs are going to sit in a shock-proof socket. It's going to guarantee a long bulb life. I went ahead an pulled a similar light and removed the lens.
That way you can see the internal components. One of the features that makes this light very unique is it has this protective casing that goes around the incandescent bulbs to protect them from the elements and guarantee a long bulb life. If you ever need to change out those bulbs, that casing is held on there with four screws. All you have to do is undo those screws. That's going to allow that casing to come right off. Then you can gain access to the bulbs as needed. Taking a look at the back side of the light, it's going to feature a universal mount design.
This is going to have three mounting slots. If we take a measurement, the distance that we have between the mounting slots, center-on-center, it's going to measure right on 2". That's going to be the same for both sets. Then outside slot to outside slot, center-on-center, is going to right on 4". Now to go ahead and go over the overall measurements of the light. The overall length is going to give us a measurement of right around 8".
The overall width is going to give us a measurement of 2-7/8". The overall depth is going to measure about 2-13/16". This is SAE and Department of Transportation compliant. The wiring design is going to include a white wire for your ground wire. It's got a ring terminal on there. It's going to feature a two-way, molded connector.
The wiring design, this is called a plug and go molded plug. It's going to provide a nice, watertight connection to the electrical harness. We're going to go ahead and hook this up to our external power source. That way you can see what it looks like with power running to it. Again, mounting hardware is included. Simply just going to make our ground connection. Then we'll make our connections over here. This is going to be the tail light function of the light. Sends out a nice, consistent signal. When we apply our brakes, you can see how it brightens up, sending out an even brighter signal. It's also going to provide that same function when we activate our turn signals. That's going to do it for today's review of part number ST26RPG. This is the Optronics Over 80" Rectangular Submersible Trailer Light for the right-hand side of your trailer. .
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
Ratings & Reviews

Martin
9/14/2024
Still working great!! No problems. Highly recommend!

Jenny N.
9/9/2022
Oh no! I will definitely have our customer service team reach out so that we can have a replacement sent to you.

Jenny N.
9/9/2022
Oh no! I will definitely have our customer service team reach out so that we can have a replacement sent to you.

Arnold P.
7/27/2017
Still working great

Heather A.
6/7/2021
Thank you for your review. If the light seems dull, I recommend to check that the ground connection is connected to a clean bare metal surface of the trailer. It sounds like you are having a classic ground issue.
Do you have a question about this Trailer Light?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.






Steve D.
8/29/2021
Just like the first day installed them.