Replacement Tail Light For Trail Star Boat Trailer

Question

Question:

I have a trail star boat trailer with a broken right tail light. It says West Bar Corp Part #3504. Do ypu make a replacement?

asked by: William S

0

Expert Reply:

We have exactly what you are looking for.

The replacement light we offer that will work for you is part # ST16RB. This is listed as an exact replacement for the Wesbar 3554 light on your trailer, which is the passenger side of the trailer.

if the light you need is for the driver side of the trailer and has the license plate light then the light you need is part # ST17RB.

expert reply by: Jeffrey L

0

Ken C.

6/20/2020

Can I get just the side marker?

Chris R.

6/23/2020

If you need just the side marker lens we do have it available with part # A17RB.

Answer 1

The lights you have on your trailer are #ST37RB and #ST36RB. The replacement lenses are #A39RB for the front lens and #A37RB for the side marker.

view full answer...

Answer 2

In order to replace the taillight on a Trail Star Trailer you'd simply find one with the same style (shape/function) and then choose the correct replacement based on size. There are several types of Trail Star Trailers so it would be difficult to…

view full answer...

Answer 3

The dimensions of the Replacement Tail Light Lens for ST36RB and ST37RB, item #A39RB, are 7-7/8 inches Long x 3-1/4 inches Wide. This lens is designed to fit the Over 80 inch, Aero Pro Submersible Trailer Tail Lights, item #ST36RB and #ST37RB.

view full answer...

Answer 4

The tail lights you have on your trailer are the ONE LED Trailer Tail Lights part #STL0067RPG for the driver side and part #STL0066RBG for the passenger side. Unfortunately, Optronics does not offer a replacement lens for this particular light so…

view full answer...

Answer 5

If you are replacing your Wesbar 3504 tail light then there is no need to remove the wiring from inside the assembly itself. A replacement light, like part #ST17RB for the left hand or part #ST16RB for the right hand, will come with its own wiring…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 9

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 10

That's a very good question, we tend to be extra cautious and say to use 10 gauge wire because that would be more than enough. When you get into longer trailers that will end up using a lot of wire the heavier gauge wire becomes more necessary.…

view full answer...

Answer 11

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Replacement Tail Light For Trail Star Boat Trailer

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching