High-quality, tapered roller bearing. Replacement part uses industry-standard number.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today, were going to review part number LM48548. This is the Redline Trailer Wheel Bearing, and this is an inner bearing for an agricultural hub. Most replacement bearings are high-quality, tapered-roller bearings, and all bearings will have an industry standard number stamped on them regardless of the brand. For you to get the correct replacement bearing, what you want to do would be look on the inner ring of the bearing. Therell be a number stamped. Like right here, this one says LM48548.
That signifies the part number for this bearing. Now, yours might be a different brand with a different number on it. But, if you get us that number, well be able to cross reference it to get you the correct bearing. Now, if you dont have the bearing number off the bearing, what you would need to do would be to measure this inside diameter of the bearing, that is the most critical measurement that fits on the spindle. To do that, you would need to use a digital caliper, which would be able to measure and have a digital readout.
The reason that is, is the measurement is in thousands of an inch. This should be the most accurate. Using a ruler or tape measure will not work. If we use this digital caliper and measure the inside that would give us an inner diameter of 1.375 inches. Now, this bearing is comprised of three different pieces.
The inner ring is the cone which slides onto the spindle, the actual tapered roller bearings which will roll, and the roller retainer or the cage which holds the roller bearings in place. Now, lubrication on a wheel bearing is normally with wheel bearing grease. In some cases, it might be oil. Now, there is one other piece that is required when installing this on your spindle and that is the bearing race, and that is the part that the bearing will sit into and also rotate in. The bearing race for this part number would be LM48510, which is sold separately.
The critical measurement on the bearing race would be the outside diameter. The outside diameter on that race would be 2.563. That should do it for a review on part number LM48548.
Customer Satisfaction Score:
100% were satisfied with this product
0% of customers were not satisfied
Ratings & Reviews
Great friendly staff
Everything went awesome. I am not used to that. Thanks.
good
Crap.
You guys are FAST, not half fast like other dealers!
So far so good!
It was delivered very fast!!! I got my bearings in 24 hours!!!
Thank you Amanda! The only thing I would suggest is that they should be packaged a little better, individually. They were all in a baggie inside the box. Other than that...very happy.
Everything looks excellent. Adam did a super job putting together this package. I will be buying from etrailer again. Thanks Louis
good bearings I use them in off road highly abused environment and replace annually as preventative maintenance have never had one fail
bearings and seals all were fine. THANK YOU FOR YOUR SERVICE , Jay-
Again how much can I say about bearings?
After traveling almost 6500 miles with these on my 1969 Yellowstone Camper, they still are good and no problems
This was an order for replacement 40+ year old wheel bearing parts that had no identifying parts numbers. It was very hard to mach up, but etrailer provided enough information for me to locate the right parts.
The parts were deliver quickly with great communication and fit perfectly!
Thanks
I replaced all the bearings races seals and brakes on a small travel trailer. Bill P.at etrailer took my order and three days later I had everything in my hands. Great job Bill ! All the parts were exact replacements and the install went very smooth. There is video help on their website to show how to make the install easier. I have been dealing with etrailer for several years and have never had a bad experience. I was completely blown away by the pre assembled brakes . Backing plate, shoes, actuators, self adjusters and wiring all ready to bolt on. How much easier can it be? With the best prices, fast shipping and great help on line etrailer is the way to go.
The bearing seems ok, It was packaged loosely and shipping took 7 days. You should not use USPS for shipping.
Everything fit well
Do you have a question about this Trailer Bearings Races Seals Cap?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.