Hub and Brakes for Vintage Camper With Dexstar Wheels

Updated 08/19/2020 | Published 08/16/2020

Products Featured in This Question

Dexter Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 6 on 5-1/2 - Pre Greased

(1075)

$299.49

Replacement Trailer Hub Bearing - LM48548

(136)

$7.53

Question:

I have a 1971 Tag a long camper. It has dexstar rims. I want to convert them over to standard hubs. The spindle is a step down type the inner seal part # is 08-900016, inner brg # T-LM48548, outside brg # L44649. Can you tell me which hub assembly I need. Im also looking for the electric brakes 4 bolt for that as well.

asked by: Danny T

Expert Reply:

Thanks for all the numbers and information. Since your trailer uses # LM48548 inner bearing we do not have a replacement hub and drum kit because of the spindle it uses. The # LM48548 bearing is only used on some agricultural hubs. So that leaves a few options, a new axle or an axle-less option.

For a new axle you will need some measurements, you'll need to know the hub face to hub face dimension, and from spring center to spring center. The other thing you need to know is the weight capacity of the axle you need, it should meet or exceed your trailer's GVWR.

Another option is the Timbren axle-less suspension. These weld or bolt on so you won't be limited to finding a certain size. They are a more expensive option, but finding the exact measurements for an axle can be a pain. They also provide a much smoother ride when compared to traditional axles. They have an aeon spring that provides progressive support and absorbs the bumps as you're driving down the road.

If you provide me with the measurements I may be able to find an axle to suit your needs along with electric brakes. I linked our selection of axles, the Timbren axle-less suspension and a review video for you to check out.

expert reply by: Robert C