Hub for Mobile Home Axle With 1.375 and 1.25 Inch Inner Diameter Bearings
Updated 06/23/2021 | Published 06/21/2021
Products Featured in This Question
Question:
Hello I have a mobile home axle I need a regular hub for regular tires my inner measurement on shaft is 1.375 and outer is 1.25 do you have a hub to fit this
asked by: Curtis
Expert Reply:
Thank you for providing the axle measurements. The only bearing that will fit the 1.375 inch inner diameter is the # LM48548 Trailer Hub Bearing. Unfortunately we do not have any hubs that are a fit with this bearing. Mobile home axles are often considered to be "one time use" so it can be difficult to find replacement parts for them.
We do have axles available if you need a replacement. Using the capacity, overall length, and spring center length you can find the right axle for your needs. You might also want to consider an axle-less option like the # ASR3500S04 Timbren Axle-Less Trailer Suspension System. For a system like this you would just need to pick the right weight capacity.
I have attached a video review for your reference.
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 6 on 5-1/2 - Pre Greased
- Trailer Hubs and Drums
- Hub with Drum
- Pre-Greased
- 25580 / 15123
- Standard Grade
- For 5200 lbs Axles
- For 6000 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: brake flange
- Search Results: leaf springs
- Search Results: trailer brakes
- Search Results: trailer hubs and drums
- Shop: Lippert Standard Dust Cap - 2.45" Diameter - Qty 2
- Search Results: lm67048
- Search Results: breaks
- Search Results: equalizer bushing
- Shop: Lippert Trailer Axle Beam with Super Lube Spindles - 93" Long - 7,000 lbs
- Q&A: Looking For Brake Assemblies And Hubs For Dexter 4,400 lb EZ-Lube Axles
- Shop: Replacement Trailer Wheel Bearing - LM67048 - Qty 1
- Shop: 1-Leaf Double-Eye Spring for 6,000-lb Trailer Axles - 25-1/4" Long
- Shop: Demco Trailer Brake Mounting Flange - 4 on 4-13/16" Bolt Pattern - 3" Pilot Hole
- Shop: A-Frame Trailer Coupler - Yoke Latch - Black - 2" Ball - Weld On - 8,000 lbs
- Shop: Optronics LED Clearance or Side Marker Light - Submersible - 3 Diodes - Rectangle - Amber Lens
- Q&A: Trailer Hub that has Bearing Numbers LM67048 and L68149
- Q&A: Are There Different Size Wheel Clamps # 15-2
- Q&A: Solution for Replacing Dexter 8-222 Trailer Hubs and Bearings
- Shop: Brake Controller
- Video: Detailed Breakdown of the Replacement U-Bolt w/Nuts for 8,000-lb, Round Trailer Axles
- Video: Review of Demco Trailer Brake Mounting Flange - DM52415
- Video: Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles: The Breakdown
- Video: Hands-On with the Trailer Brake Mounting Flange for 3-1/2" Axles, 12-1/4" Brake Assemblies
- Q&A: What Replacement Bearings Does Dexter 5,000 lb Axle
- Q&A: Can a Hayes 10 x 1 5/8" Braking Assembly W/ No Mounting Flange Be Converted to a Standard Flange
- Q&A: What Gauge Wire Should be Used to Wire Trailer Brakes