This high-quality race lasts twice as long as other brands. Special alloy blend reduces vibration, extending the life of the race. Replacement part uses industry-standard number.
Specs:
Automotive-Grade Part Also Fits:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi there, I'm Michael with etrailer.com. Today we're gonna take a quick look at this Timken replacement race. This is going to be a very high quality LMM48510 race. This does use the industry standard part number. You can see it printed there on the side. So if you're looking for extra confirmation that this is gonna work for you and you see that number on the race that you're replacing, you can trust it is gonna be a very simple swap out.
Now, this is also gonna be compatible with the bearings that you see on the screen. Now, none of those bearings are included with this. This is just gonna be the race, but if any of those bearings are the ones that you're using, you can trust this is going to be compatible with it. And then another option to confirm that this will work for you is to measure the outer diameter. And this race has an outer diameter of 2.5625 inches.
So again, that'll help to confirm that it's gonna work for you. This is gonna be a very high quality race. Like I said, it is a Timken product so if you're not familiar, Timken is one of the most well known and highly trusted brands in the industry because their products are engineered with higher quality controls. So that ensures tighter tolerances and run outs than other manufacturers. And that's also going to help to reduce any vibration and noise and improve the life of the race so that you're getting more out of it as long as you have it properly installed.
That higher quality is even evident in the way this comes individually packaged and with oil coating on it to help prevent any sort of surface rust. So when you get it, it is gonna be an excellent condition ready for you to get it installed. So if you are looking for a high quality race, this is gonna be the way to go. That completes our look for today. Again, I'm Michael with etrailer.com.
Thanks for watching.
Correct fit
Great products, Great prices, fast shipping
You guys are my go to when it comes to keeping my boat trailer ready to hit the toad !
Great price for USA made bearing races!
While replacing bearings and races on my 2006 Triton 190FS trailer, single axle 3500 lbs, I used a CE Smith bearing, race, and seal kit that included an outer race with part number L68111. I could see the bearing numbers on the old equipment but could not find a number stamped on the old race. I spent two hours or more, hammering, heating, and freezing to no avail. The old and new races appeared to be the same size, but the new one just would not go in. Finally, I used a digital micrometer to check the diameter and decided the new one was 1mm larger than the old one. I searched the internet but could find no explanation until I stumbled on the solution in an eTrailer FAQ section which pointed out that the older hubs needed an L68110 inner race. Shipping was fast, price reasonable, and the cooled race went in easily. I'm grateful for the information provided in eTrailer's site.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.