See what our Experts say about this Fulton Trailer Fenders

• Choosing Replacement Fender for Tracker Marine Boat Trailer
  The Fulton Single Axle Trailer Fender # F008583 referenced in your question may work well as a replacement on your 1996 Tracker Boat Trailer. This particular fender is designed for single axle trailers like yours that are equipped with 13 inch tires like what you have. Its overall dimensions are 9 inches wide, 40 inches long, and 12 inches tall. The front and rear mounting bracket slot is 4 inches long. I have attached an image with these and a few other dimensions labeled that you can...
  view full answer...
  
• Recommended Axle And Fenders For Karavan Trailer
  The 3,500 lb axle we offer that meets the 82-5/8 flange to flange measurement you mentioned you need is part # T3584F-8974. The spring to spring measurement for this axle is 74 inches. None of the axles we offer in this weight capacity have the 76 or 78 spring-to-spring measurement. The U-bolt mounting kit I recommend is part # APUBR-1. This includes the U-bolts, plates, and hex nuts needed for installation. If you are looking to buy new springs for your trailer you can check out the...
  view full answer...
• Looking for Replacement Fender for 2023 Summer Harbor Freight Trailer
  Hey Jeremy, so I tried to pull up pictures of your trailer to see if I could recognize the fenders and from what I found it looks the most like the part # HP69VR but you can email me back pictures and I'll see what would be the closest fit.
  view full answer...
• Determining Which Trailer Fender Size is Needed
  Trailer fenders are classified by the diameter of the trailer wheels they're compatible with. For instance, the # F008583 fender you referenced works with 13 inch diameter wheels. If you're unsure of the diameter of your wheels, the last two digits of your tires size will indicate the diameter of the wheel. For example, if your tire size is 185/80-13, 13 represents the diameter of the wheel. Choosing a fender appropriate for the wheel diameter is the most important factor. I've linked...
  view full answer...
• How to Choose Correct Boat Trailer Fenders
  I didn't receive any information about your boat trailer, but I can explain how we classify them for you, which hopefully will help you to decide which fenders you want to go with. If you're only looking to replace one fender, unfortunately we have no way of looking up which exact fenders your boat trailer left the factory with. You might need to go with 2 fenders so they'll match. We classify the fenders according to the wheel diameters they're compatible with. For instance, the Fulton #...
  view full answer...
  
• Measuring to Determine Correct Replacement Trailer Fender Size
  The Fulton Single Axle Trailer Fender # F008583 also comes in white, # F008573 and silver, # F008593. The mounting bracket slots are 28 inches apart inside to inside. This measurement will matter more than the overall length of 40 inches. If you find you need the larger size for 14 inch rims the parts are: Black # F008584-2 White # F008574-2 Silver # F008594-2 The fenders for 14 inch rims are sold as a pair. The mounting brackets are spaced 30-1/4 inches apart inside to inside.
  view full answer...
• Replacement Fender for Shorelander Boat Trailer SRV1724
  Thanks for the information regarding your boat trailer, I was able to look up the tire size of your trailer in order to determine an appropriate replacement fender. I found that the trailer tire specified for your trailer was listed as a ST185/80R13. Therefore the trailer wheel is a 13 inch wheel with an approximate overall diameter of 24.4 inches. If your trailer tire is not this size please feel free to reply with an updated tire size and I can make additional recommendations for you....
  view full answer...
• Replacement Fenders w/ Steps for 13" Tires
  Good morning. There's a couple of fenders that we have had customers install on 1996 ShoreLand’r trailers in the past. I don't have a database that shows me what parts came on your trailer so I don't know the measurements of your current fenders. The Fulton Single Axle Trailer Fender with Top and Side Steps item # F008573 in white and item # F008583 measure 9" wide x 40" long x 12" tall. They have a top step and work with 13" wheels. You can attach them to your trailer with the Galvanized...
  view full answer...
• Replacement Plastic Trailer Fender for Use on Shorelandr Tandem Axle Boat Trailer
  The replacement trailer fenders we offer include steel, aluminum and plastic types but none of these is intended as an exact OEM replacement since trailer makers routinely alter the specific smaller components, like the fenders they install. All of our trailer fenders are linked. Within the plastic fender category we have items that fit wheel diameters from 8-inches up to 15-inches. For 13-inch wheels we have 10 different plastic fenders, in lengths of 30-, 40- and 45-inches. Please note...
  view full answer...
• Fender Replacement for 13 inch Trailer Wheels for 2020 Yacht Club Jet Ski Trailer
  Hey Tregg, we have plastic fenders that would work great for your 13 inch wheels/tire with the Fulton single axle fender part # F008583. These are black but we also have white with the part # PF11X35W.
  view full answer...
• Cost Effective Fenders for Trailer with 13" Wheels
  Hello Scott. Thanks for sending in the picture. How we determine the correct fenders is by the wheel size, so with your wheel size being 13" I would recommend Fulton Single Axle Trailer Fender with Top and Side Steps - Black Plastic - 13" Wheels - Qty 1 # F008583, we only sell them individually so you will want to order quantity 2. To mount these fenders to your trailer you will want to order 2 sets of Galvanized Steel, L-Shaped, Bolt-On Brackets for Plastic, Single-Axle Fender - Qty....
  view full answer...
• Mounting Hardware For Fulton Plastic Fenders
  Hey, Glenn. There are two different bracket styles that you can use to mount the Fulton # F008583 fenders. We have some L-shaped brackets like part # CE26098G as well as U-shaped brackets like part # PF1135-BKT-2. Depending on where the fenders will be attaching on your trailer and your trailer frame will determine what brackets you will need to get.
  view full answer...
• Recommended Replacement 26-1/4" Slipper Spring
  Thanks for the picture! I have something close to your 26" slipper springs. It is possible to switch to a two eye leaf spring or even go down to a four leaf spring with a higher capacity. If you wanted to switch it up to a two eye leaf spring I would need to know the distance from the center of the two bolts. You can email me back that measurement if you decide to make the change. The 26-1/4" Long 4-Leaf Slipper Spring w/ Open Eye End item # e33SR with a protective coating is the closest...
  view full answer...
  
• Fender Kit Recommendation for Shoreland'r Trailer with 14 inch Trailer Wheels
  For a Shoreland'r style trailer fender for a 14 inch trailer wheel like the size 215/75-14 that you mentioned we have the CE Smith fender kit part # CE19504-2 which would fit and work well.
  view full answer...
• Availability Of White Replacement Fender For 2003 Shoreland'r Trailer W/ ST205/75R15 Tires
  I sure can! Based on the picture you provided the correct replacement fender for your trailer is going to be the Plastic, Single-Axle Trailer Fender w/ Top and Side Steps - White - 13" to 15" # PF11X35W which will work perfectly with the ST205/75R15 tires on your 2003 Shoreland'r Trailer and closely resembles your current fender. You will also need mounting brackets # PF1135-BKT-2 to mount the fender to your trailer. In regards to the clearance lights I will need to know the length...
  view full answer...
  
• Plastic Fender For 2005 Shoreland'r Tandem Axle Boat Trailer
  Due to shipping size restrictions we do not offer tandem axle double fenders but we do have single-tire fenders like part # F008583 that customers have used on their tandem axle applications. I have attached a photo of this customers trailer. If you think this will work for your trailer, I recommend Fulton Single Axle Trailer Fender with Top and Side Steps part # F008573 which is the same fender but in white. Please keep in mind if you use single fenders in this way they will not be...
  view full answer...
  
• How to Choose Replacement Black Step Fender for Boat Trailer
  We categorize our fenders by the size wheels they're compatible with, as you can see by clicking the link I've provided for you. I don't have any reference that will tell me the exact replacement fender that's needed for your boat trailer, but I'm sure we'd have a fender that would work for you. It sounds like the Fulton Single Axle Trailer Fender with top and side steps might be what you're needing. They're available for 12 inch wheels part # F008582, 13 inch wheels # F008583, 14 inch...
  view full answer...
• Looking for Replacement Fenders for 1999 Spartan Boat Trailer
  I don't have a fender that exactly matches the dimensions you provided, but the Fulton fender, # F008583 for black, # F008573 for white and # F008593 for silver come pretty close. The fender is 9 inches wide, 12 inches tall and 40 inches long, as you can see in the provided diagram. Each fender would attach to the trailer using the # PF1135-BKT-2 brackets, which includes two brackets. For two fenders, you'd need two sets of brackets.
  view full answer...
  
• Plastic Fender Recommendation for Shorelander Trailer with 14 inch Wheels
  It looks like the closest fender we have that should work well would be the part # F008574. If you check out the dimension picture that I attached you will see that the mounting bracket dimensions for this fender should match up well.
  view full answer...
  
• Fender For Trailer with Tire Size ST175/80-13
  We have trailer fenders that are designed specifically for the 13 inch trailer tire size like what you have like the Fulton part # F008583. I attached a picture that shows this fender installed on a trailer with a similar 13 inch tire size like you have. I know you didn't ask for a tire recommendation but the difference between the two sizes you mentioned is that the D in the one size indicates it's a bias-ply tire and the R indicates it's a radial. It's not ideal to have two different...
  view full answer...
  
• Replacement Fenders for a Shorelander Boat Trailer with 13 Inch Wheels
  We have numerous fenders that will fit a trailer with 13 inch wheels. They are not designed to fit a specific trailer so you will want to look at the measurements of each one to ensure fit. I have included a link to the fenders we carry that fit 13 inch wheels. If you want a black plastic fender with top and side steps then fender # F008583 that you referenced is the best option.
  view full answer...
• Trailer Fender Replacement for Harbor Freight Folding Trailer
  I looked up pictures of your trailer and the most similar option we carry to the fender it has on it would be the # HP99VR which is the Jeep style of fender.
  view full answer...
• Replacement Fender Options for Shorelandr Boat Trailer
  It's hard to know which exact boat trailer you have but based on the picture online of 2004 Shorelandr' boat trailers the Fulton fender part # F008583 looks just like what came on the trailer except for it's black. A closer match in color would be the part # F008573 which is white.
  view full answer...
• Can Spring Seats On Trailer Axle Be Moved To Match Trailer Frame?
  They sure can! What you will need to do is replace the spring seats that are currently welded on the axle in question, and have a qualified welder weld them in the correct location to match your trailer. Now the correct spring seats will be dependent on the diameter of your axle tube. The most common sizes are the 1-3/4" # TRSS175 which is common for 2000lb axles, the 2-3/8" # TRSS238 which is common for 3500lb axles, or the 3" # TRSS300 which are common for 5200-7000lb axles. I included...
  view full answer...

Do you have a question about this Trailer Fender?