etrailer Single Axle Trailer Fender with Top Step - Black Plastic - 12" Wheels - Qty 1

Video Transcript for Review of etrailer Trailer Fenders - Black Plastic Single Axle Top Step 12 Inch Wheel - HP53RR

Hi, everybody, Andy here with etrailer.com. Let's take a real quick look at this etrailer Black Plastic Single Axle Trailer Fender with Top Step for your 12-inch wheels. Now, this is going to work with your single-axle trailers with 12-inch in diameter wheels, and this is going to let you replace your old trailer fender with this corrosion-proof, impact and heat-resistant black plastic fender. The black, molded-in color is gonna do a pretty good job of hiding scratches. It's really not gonna show scratch as much. It's a little glossy here at the top and here at the front and in the back.

But the curves here are more of a textured, have a textured feel or pattern to 'em. So I think this is gonna do a really good job of not showing up scratches very easily or very readily. This is made of a high-density polyethylene material. And if you notice, it has a little bit of a built-in fender skirt here at the front. Let me see if I can try to give you some measurements.

So I'm gonna try to give you the length first. So let me see how this is going to show up here. So looking at the overall length from end to end, we're almost 25 inches long. And then looking at the width, let me get my ruler for that. That might be a little bit easier to show.

So looking at the width, we're sitting pretty close to about 6 and, about 6 3/4 inches wide. And then the height right at about 6 1/2 inches tall. And then, if you we inchesre wondering about the mounting holes here in the back, on center, let's see if I can line that up there for you so you can see. It looks like we're right at a foot on center with those mounting holes. So, very durable.

I think it's gonna hold up really well for you. It's gonna be an easy install. It's gonna really do a great job of handling the elements that it's going to be constantly exposed to. Well, I think that's gonna wrap up our quick look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me.