1. Trailer Fenders
  2. etrailer
  3. 14 Inch Wheels
  4. 15 Inch Wheels
  5. Steel
  6. 72 Inch Long
Tandem Axle Teardrop Trailer Fenders for Enclosed Trailers - 14" to 15" Wheels - Qty 2

Tandem Axle Teardrop Trailer Fenders for Enclosed Trailers - 14" to 15" Wheels - Qty 2

Item # HP24VR
lowest price pledge
Our Price: $290.99
Trailer Fenders
This item qualifies for Free Shipping
Shipping Weight: 40 lbs
Quantity: 
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

9" Wide x 72" long x 20-1/2" tall. These sturdy teardrop fenders each have a flat back to mount flush with your trailer. 16-Gauge, cold-rolled steel is durable. Bolt or weld onto your trailer. Lowest Prices for the best trailer fenders from etrailer. Tandem Axle Teardrop Trailer Fenders for Enclosed Trailers - 14" to 15" Wheels - Qty 2 part number HP24VR can be ordered online at etrailer.com or call 800-298-1624 for expert service.
  • All Info
  • Reviews (98)
  • Q & A (4)
  • Videos (2)
  • Photos
  • Why etrailer?

etrailer Trailer Fenders - HP24VR

  • 14 Inch Wheels
  • 15 Inch Wheels
  • Steel
  • 72 Inch Long
  • For Tandem-Axle Trailers
  • Bolt-On
  • Weld-On
  • etrailer
  • Teardrop Style
  • No Step

9" Wide x 72" long x 20-1/2" tall. These sturdy teardrop fenders each have a flat back to mount flush with your trailer. 16-Gauge, cold-rolled steel is durable. Bolt or weld onto your trailer.


Features:

  • Rounded teardrop fenders cover 2 tires on each side of your tandem-axle trailer
    • Blocks road debris from hitting other vehicles and helps protect your trailer's cargo
  • Flat mounting flange on inner edge lets you mount fender flush with your enclosed trailer
    • Close fit keeps dirt from building up between the fender and trailer
  • 1" Wide outer edge is rounded
  • Sturdy, 16-gauge, cold-rolled steel construction
    • Prime and paint the fenders to get corrosion protection and to match your trailer's finish
  • Sleek teardrop design offers a clean, stylish look
  • Weld-on or bolt-on installation
    • Requires drilling and purchase or fabrication of mounting brackets (not included) for bolt-on installation
  • Made in the USA


Specs:

  • Application: tandem-axle trailers with 14" to 15" diameter wheels
  • Dimensions: 72" long x 9" wide x 20-1/2" tall
  • Quantity: 2 fenders
  • Weight: 20 lbs each
  • 1-Year limited warranty


Tips for Replacing and Installing Trailer Fenders

  • Do your best to match the dimensions of the new fenders to your old ones.
    • If a fender was damaged during a blowout, use the opposite fender to get the dimensions.
  • As with all trailer maintenance, don't forget to chock your wheels before getting started.
  • For bolt-on fenders, use your existing mounting hardware, if possible.
    • The old mounting bolts or screws might be stripped or rusted, in which case you'll need to tap them out and buy new hardware.
  • If removing old, welded-on fenders, either carefully chisel them off yourself or take your trailer to a weld shop to have the fenders professionally removed.
  • Don't forget to prime and paint the new fenders to keep them from rusting (and to match your trailer's finish).
  • Before you start drilling, position each fender where you need it and center it over your wheel well.
    • Mark where you need to drill (measure twice, drill once).
  • Don't tighten down the mounting hardware completely until you're sure the fenders are mounted correctly.


MFS00069 Tandem Axle Trailer Fender with Tear Drop - 90-Degree Back - Cold Rolled Steel - 14" to 15" Wheels - 2 Pack





Video of Tandem Axle Teardrop Trailer Fenders for Enclosed Trailers - 14" to 15" Wheels - Qty 2

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for etrailer Tandem Axle Trailer Fenders Review and Installation

Hi there trailer owners. Today, we're going to be taking a look at Etrailer's replacement fenders. These are available in a teardrop design. The sizes do vary. So you will want to make sure to refer to the product page, to get the exact measurements on the ones you're looking at, and match those up with the size that match up with your trailer. I've got two of them here, so you can take a look at.

This one, here, is one that we've already painted. And this is what you're going to receive when you get it right out of the box with the raw finish. But if you don't need or want to paint, there is a stainless steel option available. These tandem axle teardrop style fenders are going to make a great replacement for old damaged fenders, whether it be just due to rust and corrosion on your old ones, you got some holes in them, or maybe you had a blowout and your old fender got caught up and ripped off, which is what happened to our previous customer here that we we're working on.We also have straight vendors available here at Etrailer. But the teardrop design here, to me, gives it just a nicer look.

It helps fill in that gap, so you see the wheels. It gives it a cleaner look. And I've kind of found that it seems to stiffen up the fender a little bit. The straight style seemed to have a little bit more flex in the middle, versus the teardrop.The fender is constructed of a 16-gauge cold rolled steel. And that's about a 16th of an inch when you're looking at it, and taking a ruler and measuring it.

And that makes it plenty sturdy. You can even sit on it up here. Now, I don't recommend that you put a lot of weight on it. You probably shouldn't use this as a step, but you can see here, if you're just going to take a rest for a quick second, it could easily support some weight. I'm pretty close to 200 pounds and it barely even seems to flex with me on it.And this is a great replacement regardless of the type of trailer that you have.

If you have a tandem axle, and the wheel sizes fit this fender, whether it's a boat trailer, utility trailer, enclosed trailers, such as this, it's going to look great on the trailer. It's going to give you good coverage over your tire, and act as a splash shield to keep debris from flinging up on your trailer, as well as on passing cars. Now, if you ordered the raw finish option, it's going to be shipped to you like this. It does have a very thin coating of oil on it to help protect against corrosion, but it is pretty thin. And the original ones that we got here, when we first pulled them out of the box, there was a little bit of surface rust on it. After you've got it cleaned up, we're going to put some self etching primer on it. And then we used flat black paint to finish it off.These can either be bolted on or welded on. We're going to install ours with some self-tapping screws and just bolt it on. And that's the most common way, unless you're a welder out there, that these are going to be installed. If you follow along with us, we'll show you how to get it lined up and get those run in.So here we've got our trailer. Our customer, when driving it home, recently had a blowout, and he's already replaced the tire. But when it blew out, it did rip his fender off. Fenders are typically just held on by self-tapping screws. And you can see here, where along the seam, where one ripped out there, there's one further down. And also down the other side. There was a total of four bolts that we're holding this in. And these are just self-tapping screws. And they line up with the support beams that run up the sides of the trailer.Our new fender here, we're going to be attaching to the support beams in similar locations. We're not going to be using the same holes, as we don't trust the integrity of those since the previous damage. And also our new fender is slightly smaller than the original one. So it's not going to come down as far, so we're actually going to be lowering ours down just a little bit so that when we get full coverage down on the bottom and front and back of our wheels and the bottom of our trailer. Now you can give yourself an extra set of hands, but I found it easiest if you just lift the fender. We're going to set it up on the tires like this, get it centered up. And then we're going to use floor jacks on each side, to just lift it up, to get us at the correct height. It's just going to make things easier to hold it in place. You could also use some blocks of wood if you happen to have them cut the right way. But with a Jack on each side, we can easily get it leveled out to match our trailer into the right height we want to set it at.So now that we've got the height where we want it, we went ahead and centered it, forward to backward, to get the same gap at the front and the rear. And we're also trying to line up those with the support beams that run up so that way, we can put our hardware in. So now we're just going to press it back, up against the trailer. We're going to grab a self tapping screw. So we're just going to line up our self-tapper onto our fender. And then just run it right in. Now, your self-tapping screws, you can either reuse your old ones, if you have those. Or if not, you can purchase new ones. They do not come with the fenders.Now we've got the one end. We're going to repeat that, each of the support beams. I like to start at the center and work my way out. So if you have the fender flares here, if they don't quite line up, you can kind of pull or push them to make them line up with the support beam.So now we're going to go and put in these ones here. To get ours to line up, you can see it was a little further forward, we're just going to pull out slightly on the fender. And that'll be enough to get us to get this run into the beam. Now that we've got this one installed, we can perform the exact same procedures over on the other side to get that one installed. If you have a fender that's still installed on there, then to remove it, it's just self-tapping screws. Put your gun in reverse. Take those out. And the fender just comes right off. And that completes our look at Etrailer's replacement teardrop-style fenders for tandem axle trailers.


Customer Reviews

Tandem Axle Teardrop Trailer Fenders for Enclosed Trailers - 14" to 15" Wheels - Qty 2 - HP24VR

Average Customer Rating:  4.7 out of 5 stars   (98 Customer Reviews)

9" Wide x 72" long x 20-1/2" tall. These sturdy teardrop fenders each have a flat back to mount flush with your trailer. 16-Gauge, cold-rolled steel is durable. Bolt or weld onto your trailer.

- HP24VR
by:

Arrived quickly. Nice gauge metal. Replaced my beat-up fenders.



- HP24VR
by:



- HP24VR
by:

we just received these, but they are heavy duty and fit our trailer well.



- HP24VR
by:



- HP24VR
by:



- HP24VR
by:

High quality. Very sturdy product. Craftsmanship is good, square and no distortion



- HP24VR
by:

One of the easiest sites to order from shipping is very fast



- HP24VR
by:

Great



- HP22FR
by:

Review from a similar Tandem Axle Fender in Trailer Fenders


These Particular fenders were needed to replace the original fenders on a 1988 mastercraft boat trailer.. the fenders were the closest I could find to the original... They were not in stock but e-trailer was excellent in making me aware of this and keeping us notified as to progress in getting them. They were shipped immediately after they notified us of them being received at e-trailer and we received them the next day after that. They will be installed shortly and appear to what is needed for our boat trailer...Thanks



- HP94VR
by:

Review from a similar Tandem Axle Fender in Trailer Fenders


The fenders are exactly what I was expecting for my boat trailer. Very satisfied with product and shipping including random emails on shipping status. Thank you



- HP74VR
by:

Review from a similar Tandem Axle Fender in Trailer Fenders


Arrived on time. New & clean as promised very little prep work. Clean oil off prime & paint very happy with my purchase



- HP94VR
by:

Review from a similar Tandem Axle Fender in Trailer Fenders


tandem axle tear drop fenders- awesome price fast shipping! Good quality, received my fenders in less than three days. they were packaged well and in mint condition. highly recommend etrailer! most of The local dealers didn’t have what I wanted and didn’t know when they were going to get it and the ones that did have fenders wanted about $100 more for the set needless to say etrailer is now my go to source for trailer supplies.



- HP64VR
by:

Review from a similar Tandem Axle Fender in Trailer Fenders


Very nice product! Perfect fit on the t railer.



- HP54VR
by:

Review from a similar Tandem Axle Fender in Trailer Fenders


Look really good. One fender 1” longer than other! Looks like it may be sprung a little! I am sure I can fix it! Satisfied with the product and would recommend it to others.



- HP64VR
by:

Review from a similar Tandem Axle Fender in Trailer Fenders


Very quick shipping! I didn’t expect it so soon ! Thank you !



- HP94VR
by:

Review from a similar Tandem Axle Fender in Trailer Fenders


Good quality products, reasonable prices,quick delivery- what’s not to like! Great job keep it up!!!



- HP84VR
by:

Review from a similar Tandem Axle Fender in Trailer Fenders


Arrived in a very timely manner at a very affordable price!! We will doing more business with etrailer!



- HP74VR
by:

Review from a similar Tandem Axle Fender in Trailer Fenders


Got them installed!!!



- HP94VR
by:

Review from a similar Tandem Axle Fender in Trailer Fenders


Easy order, good packing, fast shipping



- HP94VR
by:

Review from a similar Tandem Axle Fender in Trailer Fenders


Finders are exact fit. One of them showed up with some small dents in the top. This could have been from shipping. They are not damaged to the point that I cant use them though. Thank you!!!



- HP74VR
by:

Review from a similar Tandem Axle Fender in Trailer Fenders


Destroyed a fender during a tire blow-out. Turn-around was fantastic. Needed one sent to mechanic 2nd day to make a show, and it got there a day early. Quality of fender was good. Would have been 5 stars if I could have just bought one (having one in aluminum would have been even better).



- HP54VR
by:

Review from a similar Tandem Axle Fender in Trailer Fenders


I could not be happier with the customer service and quality of product. We will be repeat customers!



- HP54VR
by:

Review from a similar Tandem Axle Fender in Trailer Fenders


Quick shipping. Worked good for this project. Wish it had been a little wider. The specs said 9” wide but it was only 8”.



- HP44VR
by:

Review from a similar Tandem Axle Fender in Trailer Fenders


It is exactly what I needed and didn't take to long to get them.



- HP57VR
by:

Review from a similar Tandem Axle Fender in Trailer Fenders


Exactly what I wanted. Order arrived quickly with no damage to product. Very Happy.


28
101
Show More Reviews

Ask the Experts about this etrailer Trailer Fenders

Do you have a question about this Trailer Fender?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer fenders for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer fender information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Jeff D
Installed by:
Jeff D
Employee David F
Installed by:
David F
Employee Jameson C
Expert Research:
Jameson C
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video by:
Dustin K
Employee Alexander C
Written by:
Alexander C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.