1. Home
2. Trailer Parts
3. Trailer Fenders
4. 65 Inch Longx

Hello Scott. Thanks for sending in the picture. How we determine the correct fenders is by the wheel size, so with your wheel size being 13" I would recommend Fulton Single Axle Trailer Fender with Top and Side Steps - Black Plastic - 13"…

Yes you certainly can. In order to bolt-on a set of metal weld-on fenders such as the Single Axle Trailer Fender part #HP29VR you will need a set of mounting brackets such as the Mounting Brackets for Trailer Fender part #CE26098G-2. If you do not…

Thanks for the photo. Honestly 5 inches of clearance from the fender to the top of the tire is fine if that is what you desire. We normally recommend 4 inches to allow for the suspension travel whether with leaf springs or torsion axles to allow…

Trailer fenders are classified by the diameter of the trailer wheels they're compatible with. For instance, the #F008583 fender you referenced works with 13 inch diameter wheels. If you're unsure of the diameter of your wheels, the last two…

Douglas, it looks like the closest we have to what you're looking for is the Tandem Axle Teardrop Fenders w/ Backing Plates #HP92VR. These fenders measure 72" x 10 3/4" x 20 1/2", have the backing plates you're looking for, and…

Thank you for the photos! According to my information and what you sent in, your best option for a replacement fender is the CE Smith Black Fender: CE Smith Single Axle Trailer Fender w/ Top and Side Steps - #CE19503 (Qty 1) CE Smith Single Axle…

To install the CE Smith Single Axle Trailer Fenders w/ Top and Side Steps #CE19503-2 you need 4 of the CE Smith Galvanized Steel Step #CE26212G. The mounting hardware isn't included because every trailer design is different so you can either use…

I'd be happy to help you with that. For starters, the #F008584-2 fenders you'd looked at are designed for 14 inch wheels, you'd be better served going with the #F008585-2 which are designed for 15 inch wheels like the ones you have.…

...The # HP94VR measure 65" long x 9" wide x 15" tall so they'll be just an inch longer on either side than your current fenders....

We don't have the exact OEM replacement fender for your Bass Tracker boat trailer, however we do have the CE Smith Single Axle Trailer Fender w/ Top and Side Steps #CE19503 for a single or #CE19503-2 for both sides that'll just the same.…

I went out to our warehouse for you and measured the Tandem Axle Jeep Style Trailer Fenders part #HP62VR. The top part has a radius at each end so there isn't exactly a set point to measure from but I did my best to get the center of the radius…

...The smaller 4.80-12 is 4.9 inches wide. The 5.30-12 is 5.6 inches wide. So you will also need to make sure there is room between the side of the existing tires and the trailer frame. As long as you have...