How To Bolt-On, Weld On Trailer Fenders  

Thanks for the photo. Honestly 5 inches of clearance from the fender to the top of the tire is fine if that is what you desire. We normally recommend 4 inches to allow for the suspension travel whether with leaf springs or torsion axles to allow…

I have exactly what you need to replace the side guide rollers on your Catamaran Trailer. For this, I recommend the Yates Side Guide Roller for Boat Trailers part #YR12243-5. This roller is 12" long x 2-1/2" diameter and has a…

There is a flange on the Tandem Axle Trailer Fenders w/ Backing Plates #HP82VR that overlaps the backing plate that you'll use for the welding surface. When it comes to welding, we always recommend having this done by an experienced welder.

You definitely don't have enough clearance so it is a wonder your wheels don't rub under suspension travel over bumps. Since your 2019 Little Guy Max travel trailer has torsion axles, the correct fit for that size is the Torflex Lift Kit -…

Thanks so much for the photos, and based on those, your 2018 Liberty Outdoors Little Guy Max travel trailer has a 3,500 lb Lippert square torsion axle, for which we do have the correct lift kit, which is the following: - Axle Riser Kit - Single…

A galvanized steel fender like #CE17701G has a corrosion-resistant zinc coating applied to it, while a raw steel fender like #CE17720 does not. Both types can be painted, but it will be easier to paint the non-galvanized part. In either case the…

The most common tire size people go to from the 4.80-12 is the 5.30-12 like the Taskmaster 5.30R12 Radial Trailer Tire #TT53012C. This will give you a width increase of 1/2 inch and a diameter increase of 1.4 inches. This tire also has a speed rating…

The closest metric trailer tire size to a 4.80x12 is going to be a 145/80-12. The typical diameter of a 4.80x12 tire is 20.5 inches. On a 145/80-12, it is 21.3 inches. So the metric size will be a little over 1/4 inch taller. Make sure to measure the…

Since one end of a slipper spring is suspended instead of bolted to a hanger or shackle strap the Dexter Trailer Springs Over-Under Conversion Kit part #K71-385-00 and other likes them are considered unsafe for slipper springs. The only other option…

If your leaf springs are slipper springs, such as #WIH4, then you will not be able to use a Dexter over/under conversion kit, #K71-384-00. What you would have to do is cut off the hangers the leaf springs hang from and have new, taller ones welded on…

When it comes to installing The CE Smith Single Axle Trailer Fenders w/ Top and Side Steps - Black Plastic - 13 inch Wheels - Qty 2 #CE19503-2 you will need The Mounting Brackets for Trailer Fender - 13 inch/14 inch/15 inch Wheels - Galvanized Steel…

To install the CE Smith Single Axle Trailer Fenders w/ Top and Side Steps #CE19503-2 you need 4 of the CE Smith Galvanized Steel Step #CE26212G. The mounting hardware isn't included because every trailer design is different so you can either use…