See what our Experts say about this Fulton Trailer Fenders

• What is the Radius of CE Smith Single Axle Trailer Fender CE17701G
  If by radius you mean the length of a line segment from the center of a sphere to its perimeter then it is 11-3/4 inches given that the overall length of the fender # CE17701G is 23-1/2 inches. Because the fender is not a true half circle, this does not represent the actual dimension of the radius. Because two of these fenders placed together would not make a complete a circle, the actual radius would be unobtainable and would most likely be slightly less than 11-3/4 inches. Fulton...
  view full answer...
  
• Replacement Fenders And Brackets For An Older Karavan Trailer
  I can definitely help point you in the right direction, but we do not offer a universal fender for a Karavan trailer. Fitment mostly depends on the wheel size. Looking at these different Karavan trailers, it appears some models use a plastic fender with a step, and other use just a basic fender with no step. For example, if you have 12" wheels, a very common fender is the Fulton # F008572. This fender has steps and measures 33-1/2" long, 7-1/2" wide and 8-3/4" tall. This fender will go...
  view full answer...
• Replacement Black Fender for 2015 Tracker Trailstar Trailer
  We offer a number of black plastic replacement trailer fenders from CE Smith and Fulton that work as general-purpose replacements. All appear on the page I linked for you. I reviewed many photos of single-axle Tracker trailers and most seem to show a fender design like # F008551, # F008550 and # F008554. Be sure to confirm your wheel size to make sure you select a compatible size fender. Part # F008554, for instance, is intended for 14-inch trailer wheels while part # F008550 work with...
  view full answer...
• Fender and Mounting Brackets for a Harbor Fright Haulmaster Trailer
  I have a great fender for your Harbor Fright Haulmaster trailer it is the Fulton Single Axle Trailer Fender - Black Plastic - 8" to 12" Wheels item # F008550. This fender will fit wheels up to 12" and is 7" Wide x 20-1/4" long x 6-1/4" tall. This fender comes individually. You will also want the Mounting Brackets for Trailer Fender - 8" to 12" Wheels item # CE26065PGA.
  view full answer...
• How to Determine Correct Fender For Single Axle PWC Trailer
  You'll have to do some measuring and know your wheel size to determine the correct fender for your single axle PWC trailer as we have no way of knowing what you need. For example, if you had 8" to 12" wheels and your fenders measured 20.25" long and 6.25" tall you would go with the Fulton Single Axle Trailer Fender - Black Plastic - 8" to 12" Wheels # F008550. I have added a link below to our entire selection of single-axle fenders for you.
  view full answer...
• Grease Seal Recommendation to Replace one with ID of 1.2355 and OD of 1.975
  The closes grease seal we have to the dimensions you listed is the part # 34823. This seal has an outer diameter of 1.983 inches and an inner diameter of 1.249 inches. You might remeasure your seals to be sure. For the inner diameter it will be easier to get an exact measurement by measuring the spindle where the seal rides instead.
  view full answer...
  
• Is There Typical Way to Remove Hub That is Stuck
  There really isn't a tried and true method to get your hub off, particularly if yours somehow got hot enough that it basically welded itself to your spindle. The only thing I can really recommend is using a hammer and trying to hammer it out as best you can. Essentially, brute force.
  view full answer...
• Will Fulton Trailer Fender # F008550 Fit a 2006 Snowbear 8000 Trailer
  I did a little research and found that the model 8000 Snowbear trailer had a fender that is a little different than the Fulton Plastic Fender, # F008550. The Fulton fender has a fender skirt while the Snowbear OEM one does not. If you are looking to have this style of fender with a fender skirt, then you will need to make sure there is enough clearance inside the fender for the tire so that it does not rub the fender skirt. If your tires are more than 7 inches wide, the fender will not...
  view full answer...
• Availability of 7 Wide 19 Long Trailer Fender for Boat Trailer With 12 Wheels
  When choosing a replacement boat fender you want to do your best to match the dimensions of the new fender to your old one. Most of the time you aren't going to find a perfect match. We don't have a fender available that has those exact dimensions, but we do have some that are close. Please see the following options: -Single Axle Trailer Fender w Top Step # F008551 (21-1/2" long x 7.35" wide x x 6.5" tall) -CE Smith Single Axle Trailer Fenders # CE19501-2 (20-5/8" long x 7" wide x 6" tall) -CE...
  view full answer...
• Can I Upgrade From 8 Inch to 15 Inch Wheels On a Boat Trailer
  It is possible to switch from 8" wheels to 15" wheels yes but, in addition to fender clearance issues you will also run into not having enough surface area on the hub for the larger wheel size. For example, the Trailer Idler Hub Assembly part # AKIHUB-545-2-1K which is common on 2,000 lb axles and what I suspect you have only has enough surface area to work with 12" wheels max. Therefore, in order to upgrade to 15" wheels you will also likely need to upgrade hubs as well as fenders. In...
  view full answer...
• Availability Of Black Plastic Universal Trailer Fender
  We may have a few potential options for your, but I'm afraid we don't carry anything exactly like the fender you referenced. That fender looks very inexpensive, and we do not carry anything quite that cheap. We do have a few basic black plastic fenders that will fit the 12" or 13" wheels. I have listed a few below if you want to take a look. Fulton Single Axle Trailer Fender - Black Plastic - 8" to 12" Wheels # F008550 Single Axle Trailer Fender w Top Step - Style B - Black Plastic -...
  view full answer...
• How to Mount the Fulton Trailer Fender # F008550
  The Fulton Plastic Fender - Black - 8 to 12 inch Tires, item # F008550, is designed to be mounted to existing hardware or mounted with brackets designed to attach to the specific trailer frame they are being installed on. No mounting hardware is included. We do have some mounting hardware available (see link) that may work on your trailer. You will need to determine the mounting location and style of bracket that will work on your trailer.
  view full answer...
• Mounting Bracket Recommendation for Fulton Trailer Fender part # F008550
  The recommended mounting brackets you need for use with the Fulton Single Axle Trailer Fender # F008550 that you referenced is the # CE26065PGA.
  view full answer...
• Grease Seal Availability with Inner Diameter 1.5 and Outer 1.987
  Try measuring your old grease seal again as most likely the part # 10-9 would be the correct seal you would need. This seal has an inner diameter of 1.50 inches and an outer diameter of 1.987 which is pretty close to what you have but not quite the same. This would be the best option we could provide. The closest grease seal to match the second set of dimensions is the part # BB60002 that has inner diameter of 1.875 and outer diameter 2.560.
  view full answer...
• What Larger Tire Upgrades do You Recommend for My 4x8 Trailer?
  Thanks so much for your pictures. From the looks of the photos, it looks like you have wheels with a bolt pattern of 4 on 4". To upgrade your tires to get the maximum capacity available on your 1,400 pound 4x8 trailer with 4.80-10 wheels, a great choice is the Kenda 5.30-12 Bias Trailer Tire with 12" White Wheel - 4 on 4 - Load Range C # AM30780. Each individual wheel has a 1,250 pound weight capacity and the individual tires have a weight rating of 1,045 when inflated to 80 psi. Since...
  view full answer...
  
• Choosing Replacement Fenders for a Leeland Jet Ski Trailer with 12-Inch Wheels
  We offer a range of trailer fenders in aluminum, plastic and steel, both with and without steps, that will fit 12-inch trailer wheels. You can use the link provided to select the material of your preference as well as the length you prefer (20-inches) by clicking on the filters in the left margin. For example, we offer the Fulton no-step black plastic fender # F008550 and the white version # F008540 that are 20-inches long and fit 12-inch wheels.
  view full answer...
• Can the Fulton Trailer Fender # F008550 be mounted to the Sidewall of a Tear Camper Trailer
  You should be able to mount the Fulton Trailer Fender, # F008550, to the side of your camper trailer. Depending on the trailers construction you may need to use a mounting bracket and some carriage bolts to utilize the square attachment holes in the front and rear of the fender, or you may be able to bolt the fender directly to the side of the trailer through the fender skirt on the back side of the fender.
  view full answer...
• Weight of Fulton Single Axle Trailer Fender # F008550
  The Black Fulton Single Axle Trailer Fender # F008550 weighs just 1 pound. We also have it available in White # F008540 with the same weight of 1 pound.
  view full answer...
• Dimensions of Trailer Fender Mounting Area for part # F008550
  The flat area on the inside of the Fulton Plastic Fender, part # F008550, is 2-1/2 inches tall at its highest point and curves downward to meet the side of the fender on each end. The distance across the flat area at its lowest point is 12 inches. There are also two mounting holes on each end of the fender.
  view full answer...
• Recommended 10 Inch Plastic Fender for Boat Trailer
  It sounds like you are looking for a 10 inch wide fender. We have metal fenders that are 10 inches wide, but not plastic fenders. If you absolutely need plastic take a look at part # CE19502-2. This fender is for 12 inch wheels, but I think it would be close enough to your size. For a demonstration video click the included link.
  view full answer...
• Recommended Black Plastic Fender And Mounting Bracket For Small Trailer That Has 8 Wheels
  Your best bet is to use Fulton Plastic Fender, Style A, Black, 8" to 12" Tires # F008550 with mounting bracket Mounting Brackets for Trailer Fender # CE26065PGA. This setup is designed for trailer tire sizes 8" to 12". Your tires appear to be about 8-1/2" wide but this fender is only 7" wide. This will not be an issue as it is meant to be mounted above the tire and not
  view full answer...
• Replacement Fender Options for Choi Lee Trailer
  The closest thing we have to an 18" long fender is the Single Axle Trailer Fender # HP39VR which is 19-1/2" long. The full dimensions are 19-1/2" long x 5-1/2" wide x 5-1/4" tall so it falls a little short on the width. If you're ok with a plastic fender you could also use the Fulton Single Axle Trailer Fender # F008550. This is 7" wide x 20-1/4" long x 6-1/4" tall. Without an exact match all you can do is try to get the dimensions as close as possible on new fenders.
  view full answer...
• Mounting brackets for Mounting the Fulton Trailer Fenders # F008550 to a Motorcycle Trailer
  We carry fender mounting brackets that may work for your application. Check out the Galvanized Steel, L-Shaped, Bolt-On Brackets for Plastic, Single-Axle Fender PF775X21W (Pair), item # PF775-BKT-2. These brackets are designed for the Plastic, Single-Axle Trailer Fender - White - 8 inch to 12 inch Tires, item # PF775X21W. This style of fender is only available in white. At this time we do not have specific mounting brackets designed to work with the Fulton Plastic Fender - Black - 8...
  view full answer...

Do you have a question about this Trailer Fender?