See what our Experts say about this etrailer Trailer Fenders

• Trailer Fender Close to 36 x 10-3/4 x 18
  We have one very close, but not that exact size; what we do have is a 36" long x 10-3/4" wide x 20" tall fender: - Single Axle Trailer Fender for Enclosed Trailers - Steel - 15" to 16" Wheels # HP46VR
  view full answer...
• Replacement fenders for 1995 Pace American Enclosed Trailer
  When replacing your fenders you want to do your best to match the dimensions to what you currently have. Typically you won't find an exact match to the current fenders. Based on my research it looks like you have a tandem axle trailer with teardrop style fenders. I recommend one of the following for a replacement: -Tandem Axle Teardrop Trailer Fenders - Rounded Edges - Steel # HP64VR (68" long x 9" wide x 17" tall) -Tandem Axle Teardrop Trailer Fenders for Enclosed Trailers - Steel #...
  view full answer...
• What Fenders do You Recommend for My 16 Inch Wheels?
  For your ST235/80-16 tires like the Karrier Radial Tires # AM10248, I recommend the Single Axle Trailer Fender for Enclosed Trailers - Steel - 15" to 16" Wheels # HP46VR (for single axles) or the Tandem Axle Teardrop Trailer Fenders for Enclosed Trailers - 15" to 16" Wheels # HP64VR (for tandem axles). Both of these fenders are designed for 16 inch wheels. We do not carry single fenders that are less than 36 inches long or tandem-axle fenders that are less than 68 inches long that are confirmed...
  view full answer...
• Replacement Fender For Enclosed Pace Single Axle Trailer
  Although none of the fenders we offer are an exact match to the size you mention, we have several that are pretty close. If you would like an aluminum diamond plate-type fender, the # CE17100ATB would be a good choice, measuring 32Lx10Wx16H. The steel fender you have already looked at, part # HP46VR would also be a close match, measuring 10-3/4Wx32Lx15-1/4H, which is pretty close to the measurements you provided.
  view full answer...
• Mounting the Aluminum Tread Plate, Jeep-Style, Single-Axle Trailer Fender
  The Aluminum Tread Plate, Jeep-Style, Single-Axle Trailer Fender, item # HP96VR is designed for a weld on application and putting screws and washers through the lip on the inside of the fender would most likely not last. If these fenders were to be installed on a steel trailer you would need to have an aluminum mounting bracket welded to the inside edge of the fenders that could be used to stiffen the fender and give additional mounting points. We do have steel fenders available that should...
  view full answer...
• Replacement Fender for 2017 Tracker 175 TXW / TrailStar Trailer
  Hi Trent; we have two possible options for your replacement fender. The Single Axle Trailer Fender for Enclosed Trailers # HP46VR (36" long x 10-3/4" wide x 20" tall) or the # HP66VR (36" long x 13" wide x 20" tall). The only difference between these two is the width. I would get that measurement off of your current fenders and choose whichever is the better match.
  view full answer...
• Can You Use Trailer Fenders for Flatbed on a Vehicle
  It's actually quite common to use trailer fenders on a vehicle when fabricating as no one really has the means to stamp new metal into a custom shape for this. The best way to size a fender is by wheel diameter but this is just general so if you plan to be using larger than normal tires then you'll need to consider this when selecting said fender. You'll also likely need to use some options that are on the wider size. The mounts you'll need to figure out yourself but most fab workers will...
  view full answer...
• Will Trailer Fenders for 16 Wheels Work for 285/75R16 Tires
  You will not have any issues using a fender for 16" wheels like the Single Axle Trailer Fender # HP46VR or Tandem Axle Trailer Fenders # HP84VR with your 285/75R16 tires. Although your tires may be large, they are only 1/2" taller when compared to a more typical 235/85R16 tire. The bigger difference comes from the tire width, but that won't impact the fenders.
  view full answer...
• Availability of Large Diameter Trailer Rim Fender
  The fenders we offer for the 16 inch diameter wheels like the part # HP46VR are not offered with backing plates, BUT the fender for 14-15 inch wheels part # HP36VR does have a backing plate. This fender is only 4 inches shorter and 1-3/4 inches narrower.
  view full answer...
• Availability Of Round Style Trailer Fenders Between 35" and 24" Long And With Backing Plates
  I do have a potential solution for you, but we do not carry a fender that will fit that description exactly. The closest we have is the # HP46VR. This is 36" long, 10-3/4" wide and 20" tall. This is the longest single axle fender that we carry. Everything else will be well under 35" long. For example we have the # HP48VR which is 32" long, 9" wide and 14" tall. We also have the backing plate # HP72FR. This is a 69" x 12" section of 18-gauge steel and would need to be cut to fit the fenders.
  view full answer...
• Trailer Fender Recommendation for 16 inch Diamter Wheel
  The closest we have is the steel fender part # HP46VR which is designed for a 16 inch trailer wheel and is 10-3/4 inches wide. This would be a few inches wider than what you mentioned but could potentially work.
  view full answer...
• Fender Recommendation for a Bantam Trailer
  I am not very familiar with the tire size 16-6.00, however, I am familiar with the older agricultural tire size 600 x 16. Typically, you will want to choose a fender based on the size of your wheel. If you have 16 inch wheels, then we have 2 fenders that will fit that size. The etrailer Single-Axle Fenders, part # HP66VR, and part # HP46VR. The main difference between these two fenders is the width. Part # HP66VR has a width of 13 inches and part # HP46VR has a width of 10-3/4 inches. Since...
  view full answer...
• Fenders Needed for 16 Wheels on Escort Boat Trailer
  The fenders we have available that are compatible with 16" wheels are parts # HP46VR and # HP46FR which are 16 gauge steel and can be either welded-on or bolted on. Keep in mind the fenders are not pre-drilled and the required mounting brackets for a bolt on installation are sold separately as part # CE26098G-2. Unfortunately we don't have any plastic fenders like what you were looking at that fit the larger 16" wheels.
  view full answer...
• Recommended Steel Fenders for a 15" Tire
  Hey Doug! I've got a couple of options for a steel fender that fits 15" tires but we do not have any that are 12" wide. I have listed them below: 10-3/4" Wide - Single Axle Trailer Fender for Enclosed Trailers item # HP46VR 13" Wide - Single Axle Trailer Fender for Enclosed Trailers item # HP66VR If you have any additional questions, go ahead and throw them into the comment box below and I'll be happy to help you.
  view full answer...
• Installation of Steel Fender on 15 Inch Wheel
  The Single Axle Trailer Fender - 90-Degree Back - Steel - 15" to 16" Wheels - Qty 1 # HP46VR will use Mounting Brackets for Trailer Fender - 13"/14"/15" Wheels - Galvanized Steel - Qty 2 # CE26098G-2 instead of a backing plate. If you want the backing plate you would instead use the Single Axle Trailer Fender with Backing - Cold Rolled Steel - 14" to 15" Wheels - Qty 1 # HP36VR if you have 15 inch wheels.
  view full answer...
• Recommended Brackets for etrailer Single Axle Trailer Fenders to Use With 15 Inch Wheels
  For the etrailer Single Axle Trailer Fender - 16 Gauge Steel - 14" to 15" Wheels, # HP46VR, I called the manufacturer because we don't carry a bracket for that width of fender. The manufacturer says that for that wide a fender, they don't have a bracket and that you'd have to have it custom fabricated. The closest thing we have would be the Smith Galvanized Steel Mounting Brackets for Trailer Fender- 13, 14, and 15 Inch Wheels, # CE26098G-2. This may give you some ideas on what you would...
  view full answer...