Bright, compact illumination makes night runs and dockside tasks easier. LED light options are easy to install, from small accents to rigid strips and weather proof fixtures, so they work well on deck. They can be dimmable with an LED compatible dimmer switch and suit courtesy, spreader, or accent use around steps, a T-top, or a bimini.
Yes, many LED Light accent fixtures can be dimmed with an LED compatible dimmer switch. Match the dimmer to the light's voltage and LED type. Test dimming before final mounting to confirm smooth control. If you need finer control, a PWM power supply can help adjust brightness.
Yes, a controller with two leads can run two LED Light strips in parallel so both respond together. Align the +12V and color markings when plugging in RGB strips. After cutting a strip, seal the open ends with end caps or heat-shrink and silicone to help keep out moisture and dust.
Aim it so the beam spreads out from the mounting surface, not just straight down. A 100 degree spec refers to how wide it throws light relative to the surface, helping illuminate the area to the side. Use the cover or bracket orientation to direct light downward or outward as needed, then test at night before tightening hardware.
Use mounting covers or plates matched to the light's orientation. Horizontal and vertical covers can position a mini LED Light cleanly and help aim the beam. Verify the cover style and opening size fit your light, then route wires and dry-fit before final install to ensure a snug, rattle-free setup.
It may not if the light needs its own button pressed after power is removed. If your boat uses a master switch, check whether the light remembers its last state or requires pressing the individual switch each time. If needed, choose a light suited for switched circuits or plan wiring accordingly.
Accent Lights
Strip Lights
Filters
