Mini Rectangular LED Boat Accent Light - Waterproof - 120 Lumens - Red - Clear Lens

Video Transcript for Mini Rectangular LED Boat Accent Light Spec Review

Hi there, I'm Michael with etrailer.com. Today, we're gonna take a quick look at this Red Mini LED Accent Light. This is gonna provide a nice, bright red light for your boats and or docks. It's gonna work as an upgrade or a replacement for your step, walkway, accent, or courtesy lights. This does have a sealed waterproof polycarbonate housing and a UV resistant lens. And that's going to allow this to be a waterproof.

So it's gonna be great for your water adjacent applications. It's got an IP rating of 68, so you don't have to worry about any water getting in there, causing any issues. So it will work well for your boats and docks. And it is a nice compact size. You can see our overall width, we're just over an inch.

So we'll call it 1 and 1/8 of an inch wide by about half an inch deep and approximately 3/8 of an inch tall. We've got these 3 premium LEDs in there that are going to be very energy efficient and long lasting as well as vibration resistant. So it will hold up well for us and it provides that 120 lumens lights. So if I turn off my lights here in the studio, you can kind of see that red light better, you can see how bright it is. If I go out to my wide shot again, kind of see my studio here, how bright this is.

So especially if you're just using this to light up your steps or a walkway, it's gonna be plenty of light, even on the darkest night. We do have the clear high clarity lens that provides 180 degrees of linear lighting. So it will light up plenty of the path, so you can be sure that you're stepping in the right place and being safe. This does have a military grade circuit board construction. So it uses a urethane potting instead of a poxy, epoxy potting that is common for a lot of other options out there.

So this is gonna be very rugged for you. It's gonna have, provide better protection than your common setting and circuit board. This does have a surface mount design. The protective cover is sold separately. So if you're looking for a finished look, or wanting to add new protective cover, can be found here at etrailer.com. This will hard-wire into your 12 volt DC system. You've got a 7 inch long black wire and a 7 inch long red wire. Your black is gonna be your ground. Your red is your live wire for your energy coming in. So very easy to get hooked up. And it's only gonna draw about 0.07 to 0.09 amps. So it's gonna be very efficient for you. Won't take up much power at all to give you plenty of light. And this is, does come with a limited lifetime warranty. So if you we're to have any issues with it, you're more than welcome to reach out to us here at etrailer.com. We're always happy to work with our customers to make sure that you're getting good quality products and having good, having a good experience. So if you are looking for a mini LED red light for your boat or dock, this is gonna do a great job for you. We do also have other options as far as styles and colors. So if you're looking to add a little bit different option onto your boat or dock, we do have you covered there as well. Be sure to check out some of those other options. So that's gonna complete our look for today. Again, I'm Michael with etrailer.com. Thanks for watching..