Video Transcript for All About the Mini Rectangular LED Boat Accent Light

Hi there, I'm Michael with etrailer.com. Today, we're going to take a quick look at this Green Mini LED Accent Light. This is gonna provide a nice, bright green light for your boats or docks. And it's gonna work great as an upgrade or replacement for steps, walkways, accents, and courtesy lights. It does have a 45 degree angle to it. So you can see because of these tabs that we have here, it is going to be facing downward vibe, nice downward facing light for your illuminating walkways and that sort of thing.

This is a sealed waterproof polycarbonate housing. So it is gonna be great for your water adjacent applications like your boats and docks. The UV resistant lens and housing is, does have an IP rating of 68. So not gonna have to worry about water getting in there, causing any issues or anything like that. And it is very compact, so it should fit in a lot of different applications and you can see our overall width there is just over 1 inch about 1 and 1/8 of an inch wide.

And then our depth, we're looking at right about a half inch. And then our height is I'm gonna say 3/8 of an inch. So very compact, it will do a great job for you, fitting into this small spaces. You can see, we do have these 3 LEDs. These are premium LEDs that are gonna be very energy efficient, long lasting and vibration resistant.

So it will hold up really well for you. And they'll still provide that a nice, bright green light. I said, we are going to have about 120 lumens. So if I turn off the lights in my studio here, you can see just how bright that really is. Go to my wide shot here.

You can kind of see around my studio. So especially if we are just using this to shine down on our walkway, it's gonna provide plenty of light even on the darkest night. This clear, high clarity lens provides 180 degrees of linear lighting. So it's gonna light up our walkway, steps, other applications really well. This does have a military grade circuit board construction. So it's got a urethane potting material in there rather than the common epoxy potting. So it's gonna provide better protection for you, a longer-lasting option. This is a surface mount installation. The protective cover is sold separately. You can find that here at etrailer.com. If you wanna give it a nice finished look to it. It is going to hard-wire into your 12 volt DC system. You can see we have this 7 inch long wire and we've got a green and a black, the black is your ground. The green is your live wire that go into power. And it's only going to draw about 0.07 to 0.09 amps. So very energy efficient, will do a great job for you without drawing a whole lot of power. And it does come with a limited lifetime warranty. So if you we're to have any problems with it, you're more than welcome to reach out to us here at etrailer.com. We're always happy to work with our customers to make sure that you're getting good quality products and having a good experience. So overall, I'd say this is gonna be a really nice option for those of you who are wanting to replace or add a green LED light to your boat, dock, that sort of thing. If you are looking for other colors, we do have other options available here at etrailer.com as well. So check those out, if you're wanting to add a few more colors to your system or application. That's gonna complete our look for today. Again, I'm Michael with etrailer.com. Thanks for watching..