Hey Leo. The threshold mounting plate on the Lippert SolidStep 4.0 RV Steps item #LC65DX extends 6" past the opening of your RV's doorway. It's only 3/8" tall though. When the steps themselves are folded up and not being used…
Hey Donny! For your Dometic Penguin/Brisk Air 15,000 BTU AC model B59516.711C0-MX, the correct soft start is the #DMC93JF. This is designed for Dometic Brisk II electronic air conditioner units with in-wall thermostats.
Hey Woody, For your 2025 Grand Design Reflection 337RLS, I don't think you'll have any trouble getting either the MORryde RV Cargo Slide Tray - 72" x 39" - 2 Way Slide - 80 Percent Extension - 500 lbs #MR33FR or the MORryde RV Cargo…
Hey Randy! The cost of those replacement parts can definitely get out of hand. The right MORryde StepAbove RV Steps will depend on the measurements on your motorhome. You will need to measure your doorway width (from inside flange to inside flange)…
Hey Nicholas, thanks for the pics and information. To replace your Dometic Brisk II 9105304474 AC, I recommend the Advent Air RV Air Conditioner System item #ADV92SR in white or item #ADV62SR in black. There's no way to just replace your AC unit…
Hey Nick, thanks for reaching out. Yes, the Replacement Fabric for etrailer Powered RV Awnings #e96QV will work with other brands of awning like Solera or Dometic which are what we commonly see on campers like your 2011 Forest River Cherokee 29U. The…
Hello Bruce, Thanks for writing in! Using butyl tape between the trailer body and the Single Axle Jeep Style Trailer Fender - Diamond Plate Aluminum - 13" to 15" #HP96VR is exactly the route I would go. It stays flexible, creates an…
Hello Theresa, Yes, the TorkLift GlowStep Revolution #TLA8002 will work on your 2022 Forest River Aurora 18BHS based on the measurements you provided. Your 24 inch ground clearance is right within the operating range for the 2-step #TLA8002, and the…
Hey Scott. To add a 7-way and 4-way connector to your 2024 GMC Sierra 3500 that can be used at the same time, I recommend the TowSmart ProClass Trailer Connector item #TS49RR. It's going to replace the factory one and mount in the same position…
Hey John! You weren't finding that SolidStep because Lippert discontinued it in 2024 and that table wasn't updated to reflect this. What I recommend instead is the MORryde StepAbove RV Steps #MR26RR. These are designed to fit 23-3/4" to…
Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…
Hi Frank, The In-command system does limit our options for what air conditioners we have that'll work with that system. You can replace your Coleman AC with the Dometic FreshJet 3 RV Air Condition part #DMC94JF and install the Dometic Climate…
Hey Leo. The threshold mounting plate on the Lippert SolidStep 4.0 RV Steps item #LC65DX extends 6" past the opening of your RV's doorway. It's only 3/8" tall though. When the steps themselves are folded up and not being used…
Hey Donny! For your Dometic Penguin/Brisk Air 15,000 BTU AC model B59516.711C0-MX, the correct soft start is the #DMC93JF. This is designed for Dometic Brisk II electronic air conditioner units with in-wall thermostats.
Hey Woody, For your 2025 Grand Design Reflection 337RLS, I don't think you'll have any trouble getting either the MORryde RV Cargo Slide Tray - 72" x 39" - 2 Way Slide - 80 Percent Extension - 500 lbs #MR33FR or the MORryde RV Cargo…
Hey Randy! The cost of those replacement parts can definitely get out of hand. The right MORryde StepAbove RV Steps will depend on the measurements on your motorhome. You will need to measure your doorway width (from inside flange to inside flange)…
Hey Nicholas, thanks for the pics and information. To replace your Dometic Brisk II 9105304474 AC, I recommend the Advent Air RV Air Conditioner System item #ADV92SR in white or item #ADV62SR in black. There's no way to just replace your AC unit…
Hey Nick, thanks for reaching out. Yes, the Replacement Fabric for etrailer Powered RV Awnings #e96QV will work with other brands of awning like Solera or Dometic which are what we commonly see on campers like your 2011 Forest River Cherokee 29U. The…
Hello Bruce, Thanks for writing in! Using butyl tape between the trailer body and the Single Axle Jeep Style Trailer Fender - Diamond Plate Aluminum - 13" to 15" #HP96VR is exactly the route I would go. It stays flexible, creates an…
Hello Theresa, Yes, the TorkLift GlowStep Revolution #TLA8002 will work on your 2022 Forest River Aurora 18BHS based on the measurements you provided. Your 24 inch ground clearance is right within the operating range for the 2-step #TLA8002, and the…
Hey Scott. To add a 7-way and 4-way connector to your 2024 GMC Sierra 3500 that can be used at the same time, I recommend the TowSmart ProClass Trailer Connector item #TS49RR. It's going to replace the factory one and mount in the same position…
Hey John! You weren't finding that SolidStep because Lippert discontinued it in 2024 and that table wasn't updated to reflect this. What I recommend instead is the MORryde StepAbove RV Steps #MR26RR. These are designed to fit 23-3/4" to…
Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…
Hi Frank, The In-command system does limit our options for what air conditioners we have that'll work with that system. You can replace your Coleman AC with the Dometic FreshJet 3 RV Air Condition part #DMC94JF and install the Dometic Climate…
Step up with confidence using TorkLift pull-out step designs that feel solid underfoot and operate smoothly. Install is straightforward, often bolting in place of existing steps with clearly labeled hardware. For changing campsites, options like landing gear or adjustable feet help dial in stability on uneven ground, so getting in and out stays easy and secure.
They can be left on permanently and fold in place at the mounting block. Simple pins secure the steps, and you can remove them if you want to store or clean them. Before hitting the road, confirm the steps are fully retracted and the pins are engaged.
Match your entry height to a TorkLift range like 18-1/2 - 28, 32-1/2 - 44, or 46-1/2 - 60. Measure from the ground to the door threshold on level ground. Also confirm your mounting base width—common brackets are 25-1/2 or 27-1/2 wide. If you're eyeing a 2-step option, note some list a 16-1/2 retracted height for clearance checks.
Installation can be straightforward and may bolt in place of existing steps. Steps and hardware are clearly identified, and included spacers can help the fit. They can be heavy to hold—use a jack or grab a friend for the first bolts. Verify your mounting space; some applications require at least 27-1/2 wide and 13-7/8 deep.
Yes, ground contact helps reduce flex and improve stability. Use adjustable feet or landing gear to level on uneven surfaces. Check whether the specific step includes adjustable feet—some do not, and that affects how you fine-tune the footing.
Motorhome
Towable Camper
Truck Camper
RV Steps Parts or Accessories
Filters
