1. Home
2. RV & Camper
3. RV Jack Pads
4. 1 Jack Padx

Hey George, you could use the Roadmaster Falcon part #RM-520 with D-rings on your Jeep bumper but you would need a D-ring adapter that is the correct size for what you have. The part #RM-035 would be the correct adapter if it's 3/4 inch d-rings…

Hey Frank, We would need to know the diameter and shape of the footplate for your tongue jack in order to find the correct SnapPad to fit it.

Hey Phil, so since we know you have 10 inch octagon jack feet on your 2025 Jayco Alante 29s the SnapPad EQ part #SN76FR is for sure the correct fit. The Stromberg version is called the Base Pad Shoe and it looks like a horse shoe to me almost. I…

Do you have a crew cab or a regular cab? Torklift is really particular with their fits but with that last bit of info I should be able to see what solution would work.

Hey Gary, so a charger like the NOCO Genius Multi Bank Smart Charger part #NOC24FR would work great to keep both of your batteries topped off and charged when in storage as this was designed for charging two batteries.

Hi Steve; assuming you have the factory plastic or steel bumper you can use the Roadmaster Direct-Connect Base Plate Kit - Removable Arms #RM-521453-5. This is going to be compatible with your Roadmaster Sterling Tow Bar #RM-576. You will also need…

The correct tie-downs for your 2019 Ram 3500 Tradesman short bed depend on your hitch. You can choose from the following: With a factory installed hitch or non-Torklift aftermarket hitch -TorkLift Talon Camper Tie-Downs #TL52XR (front) and #TL34FR…

Determining which SnapPads fit your 2022 Grand Design Solitude 380FL, the diameter of each jack foot needs to be measured and determine the shape of the foot. Note that it is not uncommon for different shapes and sizes to be used between the front…

Jack feet #LC377962 for the Lippert Ground Control 3.0 #LC675817 are typically 9" in diameter and round and would require SnapPads like part #SP54FR6. I recommend measuring each of the jack feet to ensure that they're all the same and…

Hi Bernadette, You would want to plug your 50 amp to 30 amp adapter in to the power pedestal and then connect your Portable Power Watchdog Surge Protector #HU42VR to the adapter. Once the Watchdog lights show that the connection is good you can…

Based on the information I could find you are going to need the SnapPad EQ Compact Jack Pads #SP24FR4. I have included an image you can use to verify your feet do look the same to fit these pads.

Hey Brett, The 346005 part number you provided is for the control module which tells me that you have the #LC675817 on your trailer. The Replacement Lead Leg #LC305340 would be a compatible replacement for this system. If the motor and footplate are…

Hey George, you could use the Roadmaster Falcon part #RM-520 with D-rings on your Jeep bumper but you would need a D-ring adapter that is the correct size for what you have. The part #RM-035 would be the correct adapter if it's 3/4 inch d-rings…

Hey Frank, We would need to know the diameter and shape of the footplate for your tongue jack in order to find the correct SnapPad to fit it.

Hey Phil, so since we know you have 10 inch octagon jack feet on your 2025 Jayco Alante 29s the SnapPad EQ part #SN76FR is for sure the correct fit. The Stromberg version is called the Base Pad Shoe and it looks like a horse shoe to me almost. I…

Do you have a crew cab or a regular cab? Torklift is really particular with their fits but with that last bit of info I should be able to see what solution would work.

Hey Gary, so a charger like the NOCO Genius Multi Bank Smart Charger part #NOC24FR would work great to keep both of your batteries topped off and charged when in storage as this was designed for charging two batteries.

Hi Steve; assuming you have the factory plastic or steel bumper you can use the Roadmaster Direct-Connect Base Plate Kit - Removable Arms #RM-521453-5. This is going to be compatible with your Roadmaster Sterling Tow Bar #RM-576. You will also need…

The correct tie-downs for your 2019 Ram 3500 Tradesman short bed depend on your hitch. You can choose from the following: With a factory installed hitch or non-Torklift aftermarket hitch -TorkLift Talon Camper Tie-Downs #TL52XR (front) and #TL34FR…

Determining which SnapPads fit your 2022 Grand Design Solitude 380FL, the diameter of each jack foot needs to be measured and determine the shape of the foot. Note that it is not uncommon for different shapes and sizes to be used between the front…

Jack feet #LC377962 for the Lippert Ground Control 3.0 #LC675817 are typically 9" in diameter and round and would require SnapPads like part #SP54FR6. I recommend measuring each of the jack feet to ensure that they're all the same and…

Hi Bernadette, You would want to plug your 50 amp to 30 amp adapter in to the power pedestal and then connect your Portable Power Watchdog Surge Protector #HU42VR to the adapter. Once the Watchdog lights show that the connection is good you can…

Based on the information I could find you are going to need the SnapPad EQ Compact Jack Pads #SP24FR4. I have included an image you can use to verify your feet do look the same to fit these pads.

Hey Brett, The 346005 part number you provided is for the control module which tells me that you have the #LC675817 on your trailer. The Replacement Lead Leg #LC305340 would be a compatible replacement for this system. If the motor and footplate are…