Replaces 1 pad for your SnapPad jack stand pad system. Pad increases the surface area of the jack foot to help prevent sinking and provides added stability. Fits 10" octagonal or round concave jack foot.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Shane: Hey guys, Shane 00:00:01 here with etrailer.com. Today, we're going to be taking a look at the SnapPad Jack Stand Pads.With a motorhome or camper, we like to go camping to different places. We like to travel. Camping at different spots means the ground could be a little bit different. Maybe it could be a little bit softer in some places. Well, when we go to level out our trailer, if one of those jacks pushes down on the ground, that means our camper's not going to be level.Adding a SnapPad onto your jacks is going to make leveling out your camper a lot easier because we're not going to have to worry about the foot sinking in the ground.
It's going to give us a much bigger footprint to make sure that we have a solid foundation.These are going to come in a variety of different sizes, anywhere from 7-inch up to 12-inch. Here, we have the 8-inch, 9-inch, 10-inch, 11.5. There's also a 7-inch and a 12-inch. What you're going to need to do is determine what kind of foot pad you have on your jack. There's four different kinds.
You have round, you have square, you have octagon, and you have concave round. These are going to be for your round. This type is going to be for your concave round or your octagon. Then of course, your 11.5 and your 12 are going to be for rounds.Now the reason this one is for your concave round or your octagon.. You'll notice that the sides are a little bit deeper than the rest of them.
The reason that is, is because on the foot pad, on the octagon and concave round, the sides kind of roll up a little bit taller. But we want those sides to be able to come down and grab on this bottom lip.Each one of our pads are going to be the durable rubber construction. So no matter what terrain we're on, whether it's rocky or asphalt, we can rest assured that once we have our jacks down, they're going to stay in place.So with adding these onto your factory foot plate, we kind of put this in perspective. Your factory foot plate, let's say it's nine inches, which is what this pad is here. Your 9-inch foot plate is a metal plate.
When we add this, we're actually making it 11 inches. So we're going from nine inches to 11 inches, which is going to give us a much better footprint, a much more solid foundation.Not only can you buy these as a kit, but you can also buy these as separate pads. You can find each one here at etrailer.com.Now to measure your pad or to measure your foot. They determine what you have. This one's a round one. What we need to do is we need to measure across it from one side to the other. That's going to tell us what size foot pad we need. If you have octagon, you're just going to go from one flat side to the other flat side, straight across, very simple to measure. Once you measure, find the correct foot pad, and you're ready to go.My overall thoughts on these, I think these are a great idea. I think when you compare them to some of the other types of pads or some of the other types of things that people have used, like Mowers 00:03:08 for instance, or maybe a pad that you just slide underneath there. You know, when we go to take off, maybe we're in a rush, and you're going to be thinking all the way home whether you forgot the pad or not. If you forgot it, you're out of luck. Now you got to find something else. We've gotten a lot of reviews from different people who have got these and said that "this was the best thing" they've "ever bought for their RV or camper" and they "should have done it a long time ago."As far as the installation on. Installation is very simple. I do say have two people. Once you get the pad slid into place or in the area of the jack, back out, but whoever it is drop that jack down close to the path. If you have to make an adjustment, have him stop, slide the pad over and then get out from underneath the RV. Once they drop the jack down all the way, it's going to pop right into place. That doesn't mean once they're on, they have to stay on. If you have to replace them, they can come off. Take a couple of screwdrivers, you're just going to wedge it up around the plate, slide it around the side until you get half of it off, and then it'll just slide off and you can pop the new one on.That's going to do it for looking at the SnapPad Jack Stand Pads..
Average Customer Rating: 4.9 out of 5 stars (1014 Customer Reviews)
Replaces 1 pad for your SnapPad jack stand pad system. Pad increases the surface area of the jack foot to help prevent sinking and provides added stability. Fits 10" octagonal or round concave jack foot.Have used the product for one season on my Jayco Seneca. Lost one of the snap pads to include the foot plate. So Seneca owners, beware and check your foot plates to ensure their secure...or, pay the piper for a replacement.
arrived fast very easy install can't wait to see how they will work in soft soil & grass
On my way home from purchasing a new to us Newmar we lost one of the SnapPad and could not find it anywhere (sold out due to Covid-19). An RVer on social media recommended to try etrailer. I called and Odelia K. was able to help me in getting the right SnapPad for my leveling Jack 10" base plate Octagon. Thank you Odelia
Great customer service all the way through this process.
Great customer service, prompt delivery!
This size fit the our leveler feet well and snapped on. Solid and heavy duty.
Very fast and great service what I need ed
I received my order really quickly. A lot faster than the original company I had ordered my pads from.
Review from a similar Jack Pads in RV Jack Pads
Solid, durable, and expands the footprint of our landing gear. The install was extremely easy. Just set them on the ground, lower the jack's, line up the snap pads to your landing pads, and they "snap" right into place. No more pulling out my leveling blocks to place on soft ground. They also, in my view, improve the appearance. I was super excited when these arrived (I'm a childish 57 year old) and was anxious to get to the campground to put them on. Once on place, they aren't going anywhere anytime soon as I tried to get them back off, just to see what it would take, and it was almost impossible to get them off. Thank you etrailer for getting this to me as soon as they became available and I appreciate the communication and shipping quality.
Keith L - 07/09/2021Review from a similar Jack Pads in RV Jack Pads
‘Purchased a set of 4 to use on our 2019 AS, a 25’ International Serenity model, which has 5 1/2” square stabilizer feet. ‘Some hesitancy placing the order as most reviews appeared to have vehicles with round stabilizers. Manufacturer & delivery took months but was worth the wait: these are thick, heavy-duty, compressed rubber ( think rubber stall mat for race horses) and a nice, tight fit. The fit was tight enough that mounting required me to remove the foot from its arm and use a channel lock wrench to torque the snap pad edge enough for the foot plate to fit into the product groove. Once in, it appeared to be snug enough to stay there for the long haul. Re-attaching foot & pad to the stabilizer arm required another edge torque ( minimal pressure) to get the long attaching bolt to slide into its housing holes. ….long winded review for a simple Excellent rating of this product. I wasn’t disappointed with this purchase
Review from a similar Jack Pads in RV Jack Pads
Easy install with a helper and a little soap. I feel much better with this non-slip robust footpad installed. Cannot attest to durability as I've just installed them but they seem very heavy-duty. No more kneeling and situating pads when you get to camp!
Dave B - 05/22/2021Review from a similar Jack Pads in RV Jack Pads
Call their support/sales line because the manufacturer was calling them a different name. They called manufacturer and said they were in fact the correct ones for our levelers. Received and put on same day,PERFECT FIT ! Very happy with price and fast free shipping. Would recommend SnapPad,well made on heavy material and fit well.
Terry - 04/28/2021Review from a similar Jack Pads in RV Jack Pads
The SnapPads were delivered on time, keeping the etrailer tradition of quick delivery. The quality is everything the manufacturer says it is. They're very easy to install. These should last for many years and many trails.
Review from a similar Jack Pads in RV Jack Pads
Our old 5th wheel was totaled in the Texas April hail storm and it had the jack pads. Just picked up our new rig and these were the first accessory I bought. Great product.
Review from a similar Jack Pads in RV Jack Pads
Very please with my snapads. I have a 2013 Itasca Ellipse 42QD and this was a great investment! Gives me a bigger footprint, and also better leveling on my jacks. I have suggested to other members in my RV club everyone should seriously consider installing them. The snappads are good for all types of terrain!
Review from a similar Jack Pads in RV Jack Pads
Needed to replace a lost snap pad, found a wonderful deal on etrailer.com for 4 (may as well have spares). Just love these, they will sit stable in almost any condition, sad, mud, asphalt, grass, hard pan. ordering was simple, in stick and received 5 days later. If you have leveling jacks, I highly recommend
Mark M - 07/29/2021Review from a similar Jack Pads in RV Jack Pads
Nice, heavy thick pads. Very durable. It's great that I don't need to place and remove everytime I move the 5th wheel. They stay semi-permanently installed.
Review from a similar Jack Pads in RV Jack Pads
I installed these SnapPads this past July on my Entegra Cornerstone. They were easy to install with the help of a friend. I'm very happy with the extra square inches that are on the ground to support our coaches heavy weight. Not all parks have concrete or asphalt which makes these extra nice. I highly recommend them.
Review from a similar Jack Pads in RV Jack Pads
So easy to deal with etrailer and customer service follow up makes the deal even sweeter. Friend recommended snap pads but we put off ordering since no park has ever asked us to put down blocks or pads. That changed and then we were told by our mechanic that the snap pads were easier on out coach as well. Went on in 20 minutes.
Review from a similar Jack Pads in RV Jack Pads
These SnapPads are excellent. Delivery box could have used a little packing paper as the box was much larger than needed, but the box was extra sturdy, no problem. Also, could have used some install instructions, but plenty on-line videos, no foul. Overall experience with etrailer this time and previously has been very positive.
Do you have a question about this RV Jack Pad?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.