Upgrade the strength and durability of your tongue jack foot by adding this SnapPad foot. Increased surface area creates a more robust footprint compared to a standard foot. Ideal for sloped or uneven surfaces.
Features:
Specs:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everybody. Andy here with etrailer. Let's take a quick look together at the SnapPad TJ Trailer Tongue Jack Pad. Now this SnapPad jack foot is designed to make your trailer's tongue jack much more stable when you're setting up your camper. So this is going to replace the standard jack foot and it's going to give you a stronger, wider base, which is gonna help keep your trailer steady on different types of ground. Now this SnapPad foot works with electric or a manual travel trailer tongue jacks and utility trailer jacks that have a two inch inner tube.
Let me give you some measurements on the foot itself. So looking at the diameter, we are sitting pretty close to 7 3/4 inches, and then the height looks like almost three inches, and this weighs about five pounds or so. So this is going to give you a solid, stable feel when you're using this. One of the biggest advantages is the extra thickness and durability compared to standard jack feet. This is built to handle heavy duty use for years to come so you don't have to worry about it wearing out quickly.
It features omnidirectional articulation, meaning the foot can pivot up to about 10 degrees. That movement's gonna help the jack stay stable even if you're parked on uneven terrain like gravel, grass or slightly sloped campsites. On the bottom, it has anti-slip pads made from durable recycled rubber, so you're not gonna have to worry about this easily slipping around. The pads are gonna give you much better grip than your traditional solutions, like your wooden blocks. It's gonna help prevent slipping when you're stabilizing your camper.
And installation's gonna be pretty straightforward as well. This does come with this pin, so you're just going to put this in the bottom post of your jack leg and then you'll just run this pin through, just like that, and you'll be attached to your jack and you'll be good to go. Overall, this is gonna be a real simple upgrade. It's gonna give you stability, grip, and durability to your trailer setup, especially when you're camping on uneven or slippery ground. I wanted to mention here if I didn't already, we do have these channels here that are gonna help water channel away from this, so you're not gonna have to worry about the inside foot rusting or anything like that.
But if you happen to have any other questions, don't hesitate to reach out to us. We do wanna make sure that you're getting exactly what you need. Well, again, they call me Andy. Thank you for joining me.
Received the tongue jack pad timely and as advertised. Easy to install since the new foot is already imbedded in the SnapPad. Taking it on it's first run tomorrow.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.








Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.