Replacement Pad for SnapPad Jack Stand Pad System - 6" Round Jack Foot

Video Transcript for Complete Breakdown of the Replacement Pad for SnapPad Jack Stand Pad System

Hi, everybody, Andy here with etrailer.com. And today, we're gonna take a real quick look at this replacement SnapPad mini jack pad. This heavy duty rubber pad is going to snap onto your RV's leveling jack to make leveling faster and easier, eliminating the need to crawl under your trailer to position plastic pads or wood blocks. Now, this pad is designed to fit Class C motorhomes and travel trailers with six inch round jack feet. And this is also going to be compatible with BAL, Ultra-Fab and VIP 3000 leveling jacks and the Bigfoot hydraulic leveling system. Now, lemme go ahead and turn this around and retrieve my ruler here and just give you some measurements so you can be confident this is going to work for you.

Looking at the diameter, we are sitting at 7 3/4 inches. The overall height, we're sitting right at about 1 3/4 inches tall. And then the height from the top of the foot platform to the lip of the pad, we're sitting about three quarters of an inch and I weighed this pad earlier and it weighs a little bit under 2.5 pounds. So as you no doubt know, the increased surface area of your leveling jack's feet is going to provide added support for your trailer, preventing sinking into soft ground, unlike your smaller metal feet. Now, these pads are made here in the USA of durable heavy duty rubber that's actually made from recycled tires.

And they're going to grip uneven terrain and prevent your metal feet from rusting or bending. And the built-in drains are going to release moisture to prevent your jack feet from corroding. And this pad is also going to serve as a cushion so your metal feet won't crack or chip away at your driveway, and they're going to help dampen vibration from inside your motorhome that could cause shifting. There's not going to be any need to remove or replace this pad or carry other jack pads or blocks around with you. This is going to be a simple one-time installation.

You're just going to line up the pads beneath your jack feet and lower each foot until the lip on the pad fully engages and locks in place. And you're actually going to hear a snapping sound once the pad is securely installed. So installation is permanent, and once you have the SnapPad secured, you're never gonna have to worry about crawling under your RV to place pads again. So with this, you're going to get one replacement pad and if you're needing more than one and you're looking for a set, the good news is we do also carry this in a set of four. And on your screen, I am including our item number for you for that set of four.

And you can just put that item number and put it in the search field of our website and it will take you to that set of four if you need more than just this one. Well, that's gonna conclude our brief look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining.